I have an old vantage pro 2 that was running for years on on old raspberry pi with weewx. Recently I had an issue and thought I would get a second raspberry pi with new sd card for a back up. When I got the new raspberry pi, I found it was not compatible with my old one. The new one uses micro sd and the old was a regular, my old raspberry pi is running weewx 2.5 and the new one I built with weewx 3.8 The os was also updated on the new raspberry pi. When I swapped out the old pi for the new one, it started working just fine. it worked a few hours and then it crashed. I connected the old pi and still could not get updates to work. I reset both the pi and the vantage pro 2 console a few times to no avail. I finally just left the old pi connected and left it alone. After a few hours it started working fine on its own with out me doing anything. I let it run over night and all seemed fine. So I tried the new pi again only this time it woud run though the archives but would not send updates. Again the vantage pro was messed up as I reconnected the old pi and again could not get it working After resetting both the vantage pro 2 console and the pi I did finally get it working again on the old pi and the old version of weewx. So I am wondering is there a compatibility issue with the new version of weewx and an old vantage pro 2? Or does anyone have any ideas on what the issue may be? Thanks for reading this and any input you can offer.
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
