Hey Kelly, Did you ever figure out a better solution to your problem? I have a new AcuRite 02032 and have been having a heck of a time getting weewx to successfully pull data from the display USB. I've periodically had some info successfully post to wunderground, but most of the time weewx is sitting there failing to capture input from the USB, cycling 10 times and then restarting:
acurite: Found station at bus= device= acurite: Failed attempt 1 of 10 to get LOOP data: [Errno 110] Operation timed out ... acurite: Found station at bus= device= acurite: Failed attempt 10 of 10 to get LOOP data: [Errno 110] Operation timed out ver: weewx 3.8.0 / py 2.7.13 / deb stretch Tx! -JM On Friday, February 10, 2017 at 5:00:02 PM UTC-8, Kelly Hewitt wrote: > > Acurite 02064C weewx LOOP error on Ubuntu 14.04 LTS > > Failed attempt 1 of 10 to get LOOP data: error sending control > message: Protocol error > > I've had issues with this for about 13 months. It most often occurs when > the weewx host reboots, the Acurite display unit will then have USB > protocol issues for several hours until the acurite.py script effectively > regains connection with the display unit. I don't like gaps in data and > this has plagued me for a year. > > Tested: > > 1. Ferrite on the USB cable - No effect > 2. Reset the display console - No effect > 3. New USB cable (x2) - No effect > 4. CRON usb script task to reset the USB connection every 4 hours - no > effect > 5. Start the weewx host then plug in the display - no effect > 6. Plug in the display then start the weewx host - no effect > > > *The only quick solution I've found is to unplug the display from the > weewx host and connect it to a Windows machine with the Acurite Connect > software and allow it to complete a data dump, unplug it, then plug the > display USB into the weewx host.* > > After plugging it back into the weewx host and watching the ubuntu syslog > (sudo tail -f /var/log/syslog) it will indicate after a few attempts that > the USB connection is active and receiving data in +/- 5 minutes. > > This suggests the USB controller in the display device is getting reset > with the Acurite Connect software - outside the scope of what weewx > currently has access to. It's unfortunate there isn't a method to reset the > display device USB connection remotely. > > *If someone has the ability to decompose the Acurite Connect software and > find out how it is resetting the USB controller on the display device that > would be very much appreciated.* > > > *Acurite Connect Software > <https://www.acurite.com/kbase/PC_Connect_My_AcuRite.html>* > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
