I think you will find that to display LOOP and REC packets/records you will need to run weeWX directly <http://weewx.com/docs/usersguide.htm#Running_directly>. Raising debug levels will typically get you more detail on what the driver is reading/emitting (which is different to LOOP and REC data) though this is very much dependent on the driver.
Gary On Tuesday, 9 January 2018 15:23:23 UTC+10, Andrew Milner wrote: > > stop weewx > edit weewx.conf to set debug = 1 > start weewx > > the log will now contain entries for > a) LOOP data packets received from the weather station. How often depends > on the station type, and could be anything from every 2 seconds to every > minute. For some station types LOOP packets do not contain values for all > sensors > b)REC data packets are the logged records from the station taken every x > minutes where x is usually a paremeter - and usually every 5 minutes (300 > seconds) > and other debug information. The REC data is also what is stored in the > weewx database according to the archive interval in weewx.conf. It is > usual to set the weewx archive interval and the station's log interval to > be the same value (often set to 5 minues) > > > > > n Tuesday, 9 January 2018 07:07:14 UTC+2, ml wrote: > >> Sorry I am new to weewx. So I need to find out what does loop and rec >> mean. Maybe you can easily help me? I can also give you SSH access to my >> "server" if it is easier for you/someone. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
