Keith, I looked at the lat long code and no change for well over a year, its pretty simple and appears functional to me. On my site I am using 6 digit decimal lat/long and my displayed values are spot on to at least 1/100th of a minute. I just ran up a VM with weeWX 3.8.0 and put in latitude = 34.010731 longtitude = -96.425720 and index.html displays
Latitude: 34° 00.64' N Longitude: 096° 25.54' W which is slightly different to your results. Are you sure that you have those figures you listed in your first post set in weewx.conf? You did stop then start weeWX or do a config reload after changing any weewx.conf setting didn't you? You can do a wee_debug <http://weewx.com/docs/utilities.htm#wee_debug_utility> run and post the output, that will show us the weewx.conf that weeWX is using (in case there is more than one or you have an editor problem). Not too much else I can think of off hand. Does not appear to be a problem with the weeWX code though. Gary On Tuesday, 9 January 2018 18:49:35 UTC+10, gjr80 wrote: > > > > On Tuesday, 9 January 2018 18:34:13 UTC+10, [email protected] wrote: >> >> Hi Gary, >> >> I guess no major problem, about 15 or so miles from here, just like >> things to look right. Thought I might be inputting the info wrong. >> > > Understand Keith, weeWX should be converting decimal degrees to degrees > and decimal minutes much more accurate than that. I will have a look to see > what the code is doing, though I doubt anything has changed with the > lat/long conversion. Out of interest which weeWX version are you using? > > Gary > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
