Hi, I own one Klimalogg station and also Foxtrot ( www.tecomat.com )home automation system. I'm wondering about using the driver you developed on some linux machine at my house and send data to my home PLC. I have Asus WL500GP V2 with OpenWRT or Synology NAS both with USB connector.
Do you think it would be possible somehow use Asus or Synology to read and send data from TFA to my PLC? Thank you, Jindrich Dne sobota 25. října 2014 19:05:41 UTC+2 Steffen napsal(a): > > Hi, > I'm wondering if weewx is supporting TFA Klimalogg PRO (see > http://tfa-dostmann.de/ -> search for "klimalogg" - sorry there's not > permalink) > > Attaching it a Raspberry Pi I do not receive any data. In fact it seems > that even the config can't be read. > > I try to read the data by an USB transceiver. > > Config: > .... > debug = 1 > ... > # Set to type of station hardware. Supported stations include: > # Vantage FineOffsetUSB Ultimeter > # WMR100 WS28xx WS1 > # WMR200 WS23xx CC3000 > # WMR9x8 TE923 Simulator > station_type = WS28xx > > > [WS28xx] > # This section is for the La Crosse WS-2800 series of weather stations. > > # Radio frequency to use between USB transceiver and console: US or EU > # US uses 915 MHz, EU uses 868.3 MHz. Default is US. > transceiver_frequency = EU > > # The station model, e.g., 'LaCrosse C86234' or 'TFA Primus' > model = LaCrosse WS28xx > > # The pressure calibration offset, in hPa (millibars) > pressure_offset = 0 > > # The driver to use: > driver = weewx.drivers.ws28xx > > Call: > root@bruezpi:/home/weewx/bin# ./wee_config_ws28xx --debug > Using configuration file /home/weewx/weewx.conf > Driver version 0.32 > Querying the station for the configuration... > No data after 30 seconds (press SET to sync) > No data after 60 seconds (press SET to sync) > > Log > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > driver version is 0.32 > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > frequency is EU > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > altitude is 213.36 meters > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > pressure offset is 0.0 > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: found > transceiver at bus=001 device=004 > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > manufacturer: LA CROSSE TECHNOLOGY > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > product: Weather Direct Light Wireless > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > interface: 0 > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: base > frequency: 868300000 > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > frequency correction: 101656 (0x18d18) > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > adjusted frequency: 910580197 (0x364659e5) > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > transceiver identifier: 263 (0x0107) > Oct 25 18:59:41 bruezpi wee_config_ws28xx[2707]: ws28xx: MainThread: > transceiver serial: 01021801130107 > > > Is that station supported at all? Am I missing something? > > Thanks. > Steffen > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
