#   This section specifies what reports, using which skins, to generate.

[StdReport]
    
    # Where the skins reside, relative to WEEWX_ROOT
    SKIN_ROOT = skins
    
    # Where the generated reports should go, relative to WEEWX_ROOT
    HTML_ROOT = public_html
    
    # The database binding indicates which data should be used in reports.
    data_binding = wx_binding
    
    # Each of the following subsections defines a report that will be run.
    
    [[StandardReport]]
        # See the customizing guide to change the units, plot types and line
        # colors, modify the fonts, display additional sensor data, and other
        # customizations. Many of those changes can be made here by overriding
        # parameters, or by modifying templates within the skin itself.
        
        # The StandardReport uses the 'Standard' skin, which contains the
        # images, templates and plots for the report.
        skin = Standard
        [[[Units]]]
            [[[[Groups]]]]
                group_altitude = foot
                group_speed2 = mile_per_hour2
                group_pressure = inHg
                group_rain = inch
                group_rainrate = inch_per_hour
                group_temperature = degree_F
                group_degree_day = degree_F_day
                group_speed = mile_per_hour

#  commented out as per Gary for Realtimegauges    
#   [[SteelSeries]]
#       skin = ss
#       HTML_ROOT = public_html/ss
    
    [[FTP]]
        # FTP'ing the results to a webserver is treated as just another report,
        # albeit one with an unusual report generator!
        skin = Ftp
        
        # If you wish to use FTP, uncomment and fill out the next four lines.
        #user = replace with the ftp username
        #password = replace with the ftp password; put in quotes to guard against parsing errors.
        #server = replace with the ftp server name, e.g, www.threefools.org
        #path = replace with the ftp destination directory (e.g., /weather)
        
        # Set to True for an FTP over TLS (FTPS) connection. Not all servers
        # support this.
        secure_ftp = False
        
        # To upload files from something other than what HTML_ROOT is set
        # to above, specify a different HTML_ROOT here.
        #HTML_ROOT = public_html
        
        # Most FTP servers use port 21
        port = 21
        
        # Set to 1 to use passive mode, zero for active mode
        passive = 1
    
    [[RSYNC]]
        # rsync'ing to a webserver is treated as just another report
        skin = Rsync
        
        # If you wish to use rsync, you must configure passwordless ssh using
        # public/private key authentication from the user account that weewx
        # runs as to the user account on the remote machine where the files
        # will be copied.
        #
        # The following three lines determine where files will be sent.
        #server = replace with the rsync server name, e.g, www.threefools.org
        #path = replace with the rsync destination directory (e.g., /weather)
        #user = replace with the rsync username
        
        # Rsync can be configured to remove files from the remote server if
        # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
        # make a mistake in the remote path, you could could unintentionally
        # cause unrelated files to be deleted. Set to 1 to enable remote file
        # deletion, zero to allow files to accumulate remotely.
        delete = 0

##############################################################################