*Hello Andrew and others!*
*I have now found the problem of strange views of, among other things, air pressure. After your point of view of the importance of the inequality of non functioning and functioning systems with the weewx.conf and skin.conf files, I have found aberration and a significant error in weewx.conf. I do not know if [CumulusRealTime] is significant and can result in problems?* *[Engine]* * [[Services]]* *Raspberry Pi* *process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate**, * *user.crt.CumulusRealTime* *mint 18* *process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate* *Raspberry Pi* *restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, user.wcloud.WeatherCloud** # user.wcloud.WeatherCloud* *mint 18* *restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, user.wcloud.WeatherCloud* *Raspberry Pi* *[CumulusRealTime]* * f**ilename = /var/tmp/realtime.txt* *For the skin.conf file in RaspberryPi, I had changed the display to "meter, C, mm ,, m/s" under* *[Units]* * [[Groups]]* *This may not be necessary if they are enrolled in weewx.conf? So now, skin.conf is also switched to the original version.* *The configurations of the files (in original) now work with RaspberryPi as well as for mint18. **RaspberryPi has now worked since yesterday 8:00 pm* *I do not know exactly how I managed to accomplish this mismatch and this problem, but probably it's a result of my somewhat ignorant way of trying to fix something that went wrong. I think that was when I tried to change the display of the pressure to mbar.* *I am very grateful for all your help and regret that I have asked for something that really should not be a problem, if you are careful about what you do.* *Thank you so much to all of you! Andrew, Cameron, gjr80, mwall, sinantc34* *Yngve* Den måndag 29 januari 2018 kl. 20:08:07 UTC+2 skrev Andrew Milner: > > If you are trying to compare why weewx works ok on one system and not the > other then I suggest you make sure that weewx.conf and skin.conf files are > the same. If there are differences then I have to ask you why they are > different. You cannot compare two systems if the conf files are > different!!!! The only differences should be related to paths to files - > in all other respects they should be identical. > > What are the differences?? > > > > On Monday, 29 January 2018 19:34:57 UTC+2, Yngve Andersson wrote: > >> Hello Andrew! >> There is a certain difference of weewx.conf between Raspberry and >> Mint18.3! I do not know if the difference is important? >> I've been trying to make changes and additions that I found to try to fix >> the problem. There have been many tests over and over again when I signed >> in and tested. So, therefore, there has been a difference in the files. >> You'll see if the difference is significant? >> >> I will copy "Raspberry, weewx.conf" and run it in Mint18.3 >> >> Attaches both files weewx.conf >> >> Thank you, for your dedication Yngve >> >> Den måndag 29 januari 2018 kl. 17:57:26 UTC+2 skrev Andrew Milner: >>> >>> have you checked that weewx.conf is IDENTICAL on both systems? >>> >>> >>> >>> On Monday, 29 January 2018 17:43:58 UTC+2, Yngve Andersson wrote: >>> >>>> Hi Cameron! >>>> The station WMR300 is standard, *no extra* sensors! >>>> I joined WMR300 yesterday 28 Jan 3:15 pm to my desktop computer Mint >>>> 18.3 and seems to have worked OK! Joined RaspberryPi today 29 Jan 4:30 pm >>>> and now with no air pressure. >>>> So it is obvious that my RaspberyPi does not fully work out! >>>> Thanks! Yngve >>>> >>>> Den måndag 29 januari 2018 kl. 16:08:53 UTC+2 skrev Cameron D: >>>>> >>>>> They are quite odd readings.. Do you really have cloudbase and solar >>>>> radiation meters? >>>>> If not then maybe the mappings have gone awry? >>>>> Matthew will have a much better idea than me. >>>>> >>>>> Cameron. >>>>> >>>>> >>>>> On Monday, 29 January 2018 19:41:53 UTC+10, Yngve Andersson wrote: >>>>>> >>>>>> Hey! >>>>>> I have logged the following information from Raspberry and WMR300 >>>>>> with command: >>>>>> *sudo PYTHONPATH=/usr/share/weewx python >>>>>> /usr/share/weewx/weewx/drivers/wmr300.py --get-current> >>>>>> /var/tmp/wmr300-driver-output.txt* >>>>>> and >>>>>> *sudo /usr/share/weewx/weewxd /etc/weewx/weewx.conf> >>>>>> /var/tmp/wmr300-weewxd output.* >>>>>> *Attach these:* >>>>>> It's not just a problem with information going to wunderground, etc. >>>>>> ..., it's also the presentation on the local host (Raspberry)! >>>>>> / Yngve >>>>>> >>>>>> Den måndag 29 januari 2018 kl. 00:45:40 UTC+2 skrev [email protected] >>>>>> : >>>>>>> >>>>>>> Hi yngve, can you make rapidfire true for me? I wanna see how it >>>>>>> will send data to wunderground. Thanks >>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
