1. if weewx.conf in [stdArchive] section says hardware records then check the archive interval on the wh1080 and set to required interval using wee_device 2. if weewx.conf in [stdArchive] section says software records check the archive interval is set correctly in weewx.conf
check what the log says when weewx is started - it should give station interval, weewx.conf interval, and which interval will be used if there is a difference On Sunday, 1 April 2018 13:29:22 UTC+3, Rick Hewett wrote: > It's weird. Things were working fine until a few days back. Then > something went wrong with my WH1080 and I had to power-cycle it. Since > then it has been producing readings for weewx only on the hour. No > changes on the computer side, as far as I can tell (unless something odd > happened in the day or two it was struggling to get sense from the > hardware), so seems to be a hardware problem, but even a full reset > hasn't cleared it... > > Any software things I might check in case something has been corrupted > there? The config is unchanged and looks sane. > > -- > 73, Rick, M0LEP > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
