USB mode only applies to the 1000 models and the 2032/2032c from what I have read. I dont see a USB mode when cycling through. I decided to try spinning up a old rpi to test with and it appears to work there. I suspect this has something to do with old(firmware)/faulty usb ports causing issues.
On Sunday, April 29, 2018 at 10:28:48 PM UTC-7, Andrew Milner wrote: > > Have you kept pressing "set" after setting date and time? I believe > that's how you get to set usb mode on the 2032C at least. > > https://support.acurite.com/acurite/topics/how-to-set-usb-mode-on-model-02032c > > > On Monday, 30 April 2018 08:06:12 UTC+3, Alexander Shelley wrote: > >> Hi all, >> Ive got a default install of weewx on a debian machine (I have tried >> installing via apt-get and python), I'm trying to get weewx to run so I can >> export data to homeassistant, but I get the following error in my systemlog: >> >> Apr 29 22:01:10 localhost weewx[31912]: engine: Loading station type >> AcuRite (weewx.drivers.acurite) >> Apr 29 22:01:10 localhost weewx[31912]: acurite: driver version is 0.24 >> Apr 29 22:01:10 localhost weewx[31912]: acurite: R2 will be decoded using >> sensor constants >> Apr 29 22:01:10 localhost weewx[31912]: acurite: Found station at bus= >> device= >> Apr 29 22:01:10 localhost weewx[31912]: acurite: Failed attempt 1 of 10 >> to get LOOP data: [Errno 5] Input/Output Error >> >> This model seems to not have a USB mode, so its not that. >> Searching my model number pulls up some with similar problems, but their >> solutions don't seem to effect my outcomes. >> Any ideas? >> >> Similar thread: >> https://groups.google.com/forum/#!topic/weewx-user/raHOllx2Yk4 >> >> weewx.conf: >> >> ############################################################################## >> >> # This section is for general configuration information. >> >> # Set to 1 for extra debug info, otherwise comment it out or set to zero >> debug = 1 >> >> # Root directory of the weewx data file hierarchy for this station >> WEEWX_ROOT = /home/weewx >> >> # How long to wait before timing out a socket (FTP, HTTP) connection >> socket_timeout = 20 >> >> # Do not modify this. It is used when installing and updating weewx. >> version = 3.8.0 >> >> >> ############################################################################## >> >> # This section is for information about the station. >> >> [Station] >> >> # Description of the station location >> location = ShelleyHome >> >> # Latitude and longitude in decimal degrees >> latitude = 90.000 >> longitude = 0.000 >> >> # Altitude of the station, with unit it is in. This is downloaded from >> # from the station if the hardware supports it. >> altitude = 112, meter # Choose 'foot' or 'meter' for unit >> >> # Set to type of station hardware. There must be a corresponding >> stanza >> # in this file with a 'driver' parameter indicating the driver to be >> used. >> station_type = AcuRite >> >> # If you have a website, you may specify an URL >> #station_url = http://www.example.com >> >> # The start of the rain year (1=January; 10=October, etc.). This is >> # downloaded from the station if the hardware supports it. >> rain_year_start = 1 >> >> # Start of week (0=Monday, 6=Sunday) >> week_start = 6 >> >> >> ############################################################################## >> >> [AcuRite] >> # This section is for AcuRite weather stations. >> >> # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' >> model = AcuRite 02064c >> >> # The driver to use: >> driver = weewx.drivers.acurite >> >> >> ############################################################################## >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
