<https://lh3.googleusercontent.com/-IRZb3ZtGE8c/WvsRo88aODI/AAAAAAAAAAM/kE02xY9fHssbxubo546VF91RDaDzECb3wCLcBGAs/s1600/dayrx.png>
If you look closely the blue line stops when I disconnected the Fine Offset Station and connected the Vantage. On Tuesday, May 15, 2018 at 5:46:57 PM UTC+1, [email protected] wrote: > > I have been running WeeWX on a Raspberry Pi 3 for a while now with a Fine > Offset USB Station (an Aercus Instruments Ws3083 Pro) very successfully. > > I decided to update to a Vantage Pro2 Wireless. > > The update went well. > > After setting up the station I stopped WeeWX ran sudo wee_config > --reconfigure, changed to the Vantage Drivers and restarted WeeWX. > > All is well but I have just noticed the ISS signal graph is not showing > anything. > > I have run wee_device -- info and checked the ISS channel is set to 1 and > checked weewx.conf and checked the iss_id is set to 1 > > My WeeWX station output is at http://wx-watch.co.uk/weewx/ (My main > website is www.wx-watch.co.uk > > I shortcut to the ISS graph is http://www.wx-watch.co.uk/weewx/dayrx.png > > The log does not produce any errors > > Any advice > > John > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
