The WeeWX vantage driver needs to control the state the logger is in. In particular, to switch it back and forth between LOOP and archive mode.
So does WeatherLink.com. Unfortunately, this means you have to choose between one or the other. They both can't control the state. It's not so much about the socket (although that's an issue, too), as the logger state. -tk On Fri, Aug 10, 2018 at 4:33 AM Premle <googlem...@silverserver.at> wrote: > Hi, > > I noticed weewx keeps the IP data logger from sending data to > weatherllink.com > > On > https://www.davisinstruments.com/resource/how-do-i-communicate-directly-with-my-weatherlinkip-data-logger/ > I found the following info: > > Please note that in order to allow the IP logger to send to >> WeatherLink.com, you must release the TCP socket for about 5 seconds once >> per minute for the current conditions (loop packet) to be sent and about 60 >> seconds once per hour for the archive records to be sent up. >> > > Could it be the current davis driver does not take this suggestion into > account? At least there is no configuration option to trigger such > behaviour. > The alternative would probably be weewx forwarding the data to > weatherlink.com > > Did anyone else run into this issue? > > > > > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
