Re: Aercus Weather Ranger / Pi / Interceptor - All working except one last hurdle - Solved - Syntax!! Well as many have said, read the brilliant manual that Tom Keffer has produced, as to quote 'the answer to your question will be found in there and many questions you didn't know you had'!
I thought I had; I have been eating and sleeping it for the last week or so, but that didn't prevent me from making a 'school-boy' error - syntax!! Solved!..... The more observant of you out there, well certainly more observant than me, will have noted that I copied and pasted a few commands I tried in [Std Calibrate], namely: windSpeed = WindSpeed * 3.6 wind = wind * 3.6 wind_speed = wind_speed * 3.6 Note the mistake on the first one: WindSpeed instead of: *w*indSpeed So now I know the commands/variables to input in the correct syntax: windGust windSpeed It all works - problem solved. Throughout this whole process I have learnt a lot and enjoyed solving all the problems. *Thank you Tom Keffer and Mathew Wall - your work is superb and you have raised the bar in my knowledge.* I will leave this post up for a day or so just in case anyone is 'racking their brains' to help me, then probably delete it, as I have answered my own question. RTFQ as the say! Happy and embarrassed, Dave. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.