[image: Modbus_readout.jpg] <about:invalid#zClosurez>
Hello, many Thanks for your Answer! "..... take a look at the weewx-cm1 driver. it imports the minimalmodbus python package and uses the Instrument and other constructs in that API to communicate with the CM1 hardware using its modbus interface. it has been tested using a usb modbus interface. (running continuously for a few years now without problems, and on windows too!)" The dyacon.CM1 Driver is very nice but using "Modbus RTU" the communication is over RS485 (tty) but the X320m is using the communication over TCP/IP. No way for me to customize. I am not a programmer. Can anybody help to integrate? Many Thanks! On Thursday, July 5, 2018 at 3:10:45 AM UTC+2, mwall wrote: > > > > On Monday, June 18, 2018 at 2:28:13 PM UTC-4, wetterbbb wrote: >> >> Hi All, >> i use a weather station with Modbus support. (Modbus/TCP -Slave) >> >> https://www.controlbyweb.com/x320m/ >> >> How can i read the registers for working with weewx ? >> Does somebody use Modbus Sensors ? >> >> > the weewx-cm1 driver uses modbus. the CM1 is the data logger interface to > weather stations made by dyacon. > > https://dyacon.com/product-category/weather-stations/ > > take a look at the weewx-cm1 driver. it imports the minimalmodbus python > package and uses the Instrument and other constructs in that API to > communicate with the CM1 hardware using its modbus interface. it has been > tested using a usb modbus interface. (running continuously for a few years > now without problems, and on windows too!) > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
