Hi,

I am not aware of any explicit support for Grove hardware from Switchdoc 
but there have been a number of posts regarding getting information from 
GrovePi (is that the same ?) into WeeWX. I know one fellow had a GrovePi 
driver that seemed to mostly work but needed some fine tuning, but he 
seemed to go quiet after a while. I suggest you search the weewx-user group 
for GrovePi, there are quite a few threads. I suspect that you will 
ultimately need to develop some of the software yourself, but then since 
you are building your own weather station perhaps that is not such a leap 
for you :) There are plenty of helpful folks here and putting together a 
driver is pretty simple, especially if you have control over what and how 
the station is emitting. You might also want to have a look at the 
Customization Guide, especially the Porting to new hardware 
<http://weewx.com/docs/customizing.htm#porting> section and probably the 
Introduction <http://weewx.com/docs/customizing.htm#introduction> as well.

Gary

On Tuesday, 28 August 2018 09:21:35 UTC+10, Gunnar H. Valdimarsson wrote:
>
> I have hardware from switchdoc.com and did make weather station but want 
> to change to Weewx, the interface is much better.
> Have you made support for Grove hardware from Switchdoc?
>
> I am using 
>
>    - Interface board 
>    
> https://shop.switchdoc.com/collections/grove/products/the-weather-board-w-grove-interface-board-for-weather-instruments-for-raspberry-pi-arduino
>    - WeatherRack - Anemometer/Wind /Rain 
>    
> https://shop.switchdoc.com/collections/sensors/products/weatherrack-anemometer-wind-rain-for-weatherpiarduino-weatherplus-raspberry-pi-arduino
>    - 4 Channel 16 Bit Analog to Digital Converter 
>    
> https://shop.switchdoc.com/collections/i2c/products/grove-4-channel-16-bit-analog-to-digital-converter
>    -  AM2315 - Encased I2C Temperature/Humidity 
>    
> https://shop.switchdoc.com/collections/weather/products/grove-am2315-encased-i2c-temperature-humidity-sensor-for-raspberry-pi-arduino
>    
>
> Gunnar H.    
> Iceland
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to