Hello there, To close this out, turns out the RaspberryPi POE hat has some problems, which was bouncing the USB ports
https://www.raspberrypi.org/forums/viewtopic.php?f=45&t=220984&sid=8ffc99c87087908a51116019fa00d2fb&start=125 Using USB power, and 3.8.2 is running fine. Jim On Thursday, September 6, 2018 at 7:57:48 PM UTC-7, jfk wrote: > > Hello there, > > I was coming form 3.8.0. I'm pretty sure the problem is the Raspberry pi > 4.14 kernel update. I did another > > sudo rpi-update > > And it seems much happier talking to the vantage. I did see a couple > > Sep 6 19:49:30 dcrwx weewx[472]: vantage: DMPAFT try #1; error: Timeout > in get_data_with_crc16 > > But it added records, and is generating pages.... > > | You are using the port /dev/vantage. Make sure it points to the port you > think it points to. > > Yea, I had to mess with my udev entry to make it happy with the 4.14 > updates, but this seems to work well: > > ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="10c4", > ATTRS{idProduct}=="ea60", SYMLINK+="vantage", TAG+="systemd", > ENV{SYSTEMD_WANTS}="weewx.service", GROUP = "drycreekwxuser", MODE = "664" > > Jim > > > On Friday, August 31, 2018 at 4:28:35 PM UTC-7, Thomas Keffer wrote: >> >> What version did you update from? There have been no significant changes >> to the Vantage runtime in years --- just configuration changes. >> >> You are using the port /dev/vantage. Make sure it points to the port you >> think it points to. As an experiment, try using the real port name (usually >> /dev/ttyUSB0). If that works, you know you have a udev problem. >> >> -tk >> >> >> >> On Fri, Aug 31, 2018 at 3:07 PM jfk <[email protected]> wrote: >> >>> Hello there, >>> >>> Did a full update to the latest Raspberry PI 3B+, Weewx 3.8.2 it seems >>> either the vantage tty is bouncing, or weewx has some issue with it: >>> >>> Aug 31 14:56:17 dcrwx weewx[12677]: engine: Initializing weewx version >>> 3.8.2 >>> >>> Aug 31 14:56:17 dcrwx weewx[12677]: engine: Using Python 2.7.13 >>> (default, Nov 24 2017, 17:33:09) #012[GCC 6.3.0 20170516] >>> >>> Aug 31 14:56:17 dcrwx weewx[12677]: engine: Platform >>> Linux-4.14.66-v7+-armv7l-with-debian-9.4 >>> >>> Aug 31 14:56:17 dcrwx weewx[12677]: engine: Locale is 'en_US.UTF-8' >>> >>> Aug 31 14:56:17 dcrwx weewx[12677]: engine: pid file is >>> /var/weewx/run/weewx.pid >>> >>> Aug 31 14:56:17 dcrwx weewx[12683]: engine: Using configuration file >>> /home/drycreekwxuser/weewx/weewx.conf >>> >>> Aug 31 14:56:17 dcrwx weewx[12683]: engine: Loading station type Vantage >>> (weewx.drivers.vantage) >>> >>> Aug 31 14:56:17 dcrwx weewx[12651]: . >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: engine: StdConvert target unit is 0x1 >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: wxcalculate: The following values >>> will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, >>> dewpoint=prefer_hardware, appTemp=prefer_hardware, >>> rainRate=prefer_hardware, windrun=prefer_hardware, >>> heatindex=prefer_hardware, maxSolarRad=prefer_hardware, >>> humidex=prefer_hardware, pressure=prefer_hardware, >>> inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, >>> cloudbase=prefer_hardware >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: wxcalculate: The following >>> algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: engine: Archive will use data >>> binding wx_binding >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: engine: Record generation will be >>> attempted in 'hardware' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: engine: Using archive interval of >>> 300 seconds (specified by hardware) >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: engine: Using binding 'wx_binding' >>> to database 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Starting backfill of daily >>> summaries >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: restx: StationRegistry: Registration >>> not requested. >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: restx: Wunderground: Posting not >>> enabled. >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: restx: PWSweather: Posting not >>> enabled. >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: restx: CWOP: Posting not enabled. >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: restx: WOW: Posting not enabled. >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: restx: AWEKAS: Posting not enabled. >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: engine: Starting up weewx version >>> 3.8.2 >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: engine: Clock error is -0.10 seconds >>> (positive is fast) >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:25:00 PDT (1535750700) to database 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:25:00 PDT (1535750700) to daily summary in 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:30:00 PDT (1535751000) to database 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:30:00 PDT (1535751000) to daily summary in 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:35:00 PDT (1535751300) to database 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:35:00 PDT (1535751300) to daily summary in 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:40:00 PDT (1535751600) to database 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:40:00 PDT (1535751600) to daily summary in 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:45:00 PDT (1535751900) to database 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:45:00 PDT (1535751900) to daily summary in 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:50:00 PDT (1535752200) to database 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:50:00 PDT (1535752200) to daily summary in 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:55:00 PDT (1535752500) to database 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: manager: Added record 2018-08-31 >>> 14:55:00 PDT (1535752500) to daily summary in 'weewx.sdb' >>> >>> Aug 31 14:56:18 dcrwx weewx[12683]: engine: Starting main packet loop. >>> >>> Aug 31 14:56:30 dcrwx weewx[12683]: vantage: SerialException on read. >>> >>> Aug 31 14:56:30 dcrwx weewx[12683]: **** device reports readiness to >>> read but returned no data (device disconnected or multiple access on port?) >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** Is there a competing >>> process running?? >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: LOOP try #1; error: device >>> reports readiness to read but returned no data (device disconnected or >>> multiple access on port?) >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: Unable to wake up console >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: LOOP try #2; error: Unable >>> to wake up Vantage console >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: Unable to wake up console >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: LOOP try #3; error: Unable >>> to wake up Vantage console >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: Unable to wake up console >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: LOOP try #4; error: Unable >>> to wake up Vantage console >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: LOOP max tries (4) exceeded. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: vantage: SerialException on write. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** write failed: [Errno 5] >>> Input/output error >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: engine: Caught WeeWxIOError: Max >>> tries exceeded while getting LOOP data. >>> >>> Aug 31 14:56:31 dcrwx weewx[12683]: **** Waiting 60 seconds then >>> retrying... >>> >>> Aug 31 14:57:31 dcrwx weewx[12683]: engine: retrying... >>> >>> Aug 31 14:57:31 dcrwx weewx[12683]: engine: Using configuration file >>> /home/drycreekwxuser/weewx/weewx.conf >>> >>> Aug 31 14:57:31 dcrwx weewx[12683]: engine: Loading station type Vantage >>> (weewx.drivers.vantage) >>> >>> Aug 31 14:57:31 dcrwx weewx[12683]: import of driver failed: [Errno 2] >>> could not open port /dev/vantage: [Errno 2] No such file or directory: >>> '/dev/vantage' (<class 'serial.serialutil.SerialException'>) >>> >>> Aug 31 14:57:31 dcrwx weewx[12683]: engine: Unable to load driver: >>> [Errno 2] could not open port /dev/vantage: [Errno 2] No such file or >>> directory: '/dev/vantage' >>> >>> Aug 31 14:57:31 dcrwx weewx[12683]: **** Exiting... >>> >>> >>> pi@dcrwx:~ $ sudo /home/drycreekwxuser/weewx/bin/wee_debug --info >>> >>> Using verbosity=1, displaying most info >>> >>> >>> wee_debug output will be sent to stdout(console) >>> >>> >>> Using configuration file /home/drycreekwxuser/weewx/weewx.conf >>> >>> Using database binding 'wx_binding', which is bound to database >>> 'archive_sqlite' >>> >>> >>> System info >>> >>> Platform: Linux-4.14.66-v7+-armv7l-with-debian-9.4 >>> >>> Python Version: 2.7.13 >>> >>> >>> Load Information >>> >>> 1 minute load average: 1.39 >>> >>> 5 minute load average: 1.22 >>> >>> 15 minute load average: 1.08 >>> >>> >>> General Weewx info >>> >>> Weewx version 3.8.2 detected. >>> >>> >>> Station info >>> >>> Station type: Vantage >>> >>> Driver: weewx.drivers.vantage >>> >>> >>> Driver info >>> >>> [Vantage] >>> >>> # This section is for the Davis Vantage series of weather stations. >>> >>> >>> >>> # Connection type: serial or ethernet >>> >>> # serial (the classic VantagePro) >>> >>> # ethernet (the WeatherLinkIP) >>> >>> type = serial >>> >>> >>> >>> # If the connection type is serial, a port must be specified: >>> >>> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >>> >>> # /dev/ttyUSB0 is a common USB port name >>> >>> # /dev/ttyS0 is a common serial port name >>> >>> # BSD: >>> >>> # /dev/cuaU0 is a common serial port name >>> >>> port = /dev/vantage >>> >>> >>> >>> # If the connection type is ethernet, an IP Address/hostname is >>> required: >>> >>> host = 1.2.3.4 >>> >>> >>> >>> ###################################################### >>> >>> # The rest of this section rarely needs any attention. >>> >>> # You can safely leave it "as is." >>> >>> ###################################################### >>> >>> >>> >>> # Serial baud rate (usually 19200) >>> >>> baudrate = 19200 >>> >>> >>> >>> # TCP port (when using the WeatherLinkIP) >>> >>> tcp_port = 22222 >>> >>> >>> >>> # TCP send delay (when using the WeatherLinkIP): >>> >>> tcp_send_delay = 0.5 >>> >>> >>> >>> # The id of your ISS station (usually 1). If you use a wind meter >>> connected >>> >>> # to a anemometer transmitter kit, use its id >>> >>> iss_id = 1 >>> >>> >>> >>> # How long to wait for a response from the station before giving up >>> (in >>> >>> # seconds; must be greater than 2) >>> >>> timeout = 4 >>> >>> >>> >>> # How long to wait before trying again (in seconds) >>> >>> wait_before_retry = 1.2 >>> >>> >>> >>> # How many times to try before giving up: >>> >>> max_tries = 4 >>> >>> >>> >>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>> >>> model_type = 2 >>> >>> >>> >>> # The driver to use: >>> >>> driver = weewx.drivers.vantage >>> >>> >>> Currently installed extensions >>> >>> Extension Name Version Description >>> >>> dcrskin 1.1.6 dcrskin skin for weewx. >>> >>> >>> Archive info >>> >>> Database name: weewx.sdb >>> >>> Table name: archive >>> >>> Unit system: 1 (US) >>> >>> First good timestamp: 2016-01-02 16:40:00 PST (1451781600) >>> >>> Last good timestamp: 2018-08-31 15:00:00 PDT (1535752800) >>> >>> Number of records: 213051 >>> >>> weewx (weewx.conf) is set to use an archive interval of 300 seconds. >>> >>> The station hardware was not interrogated in determining archive >>> interval. >>> >>> >>> Databases configured in weewx.conf >>> >>> Database name: weewx.sdb >>> >>> Database driver: weedb.sqlite >>> >>> >>> Database name: weewx >>> >>> Database driver: weedb.mysql >>> >>> Database host: localhost >>> >>> >>> >>> Parsed and obfuscated weewx.conf >>> >>> # WEEWX CONFIGURATION FILE >>> >>> # >>> >>> # Copyright (c) 2009-2015 Tom Keffer <[email protected]> >>> >>> # See the file LICENSE.txt for your rights. >>> >>> >>> >>> ############################################################################## >>> >>> >>> # This section is for general configuration information. >>> >>> >>> # Set to 1 for extra debug info, otherwise comment it out or set to zero >>> >>> debug = 0 >>> >>> >>> # Root directory of the weewx data file hierarchy for this station >>> >>> WEEWX_ROOT = /home/drycreekwxuser/weewx >>> >>> >>> # How long to wait before timing out a socket (FTP, HTTP) connection >>> >>> socket_timeout = 20 >>> >>> >>> # Do not modify this. It is used when installing and updating weewx. >>> >>> version = 3.8.2 >>> >>> >>> >>> ############################################################################## >>> >>> >>> # This section is for information about the station. >>> >>> >>> [Station] >>> >>> >>> >>> # Description of the station location >>> >>> location = "Glasshouse, Dry Creek" >>> >>> >>> >>> # Latitude and longitude in decimal degrees >>> >>> latitude = 38.394415 >>> >>> longitude = -122.416557 >>> >>> >>> >>> # Altitude of the station, with unit it is in. This is downloaded >>> from >>> >>> # from the station if the hardware supports it. >>> >>> altitude = 612, foot # Choose 'foot' or 'meter' for unit >>> >>> >>> >>> # Set to type of station hardware. There must be a corresponding >>> stanza >>> >>> # in this file with a 'driver' parameter indicating the driver to be >>> used. >>> >>> station_type = Vantage >>> >>> >>> >>> # If you have a website, you may specify an URL >>> >>> #station_url = http://www.example.com >>> >>> >>> >>> # The start of the rain year (1=January; 10=October, etc.). This is >>> >>> # downloaded from the station if the hardware supports it. >>> >>> rain_year_start = 1 >>> >>> >>> >>> # Start of week (0=Monday, 6=Sunday) >>> >>> week_start = 6 >>> >>> >>> >>> ############################################################################## >>> >>> >>> [Vantage] >>> >>> # This section is for the Davis Vantage series of weather stations. >>> >>> >>> >>> # Connection type: serial or ethernet >>> >>> # serial (the classic VantagePro) >>> >>> # ethernet (the WeatherLinkIP) >>> >>> type = serial >>> >>> >>> >>> # If the connection type is serial, a port must be specified: >>> >>> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >>> >>> # /dev/ttyUSB0 is a common USB port name >>> >>> # /dev/ttyS0 is a common serial port name >>> >>> # BSD: >>> >>> # /dev/cuaU0 is a common serial port name >>> >>> port = /dev/vantage >>> >>> >>> >>> # If the connection type is ethernet, an IP Address/hostname is >>> required: >>> >>> host = 1.2.3.4 >>> >>> >>> >>> ###################################################### >>> >>> # The rest of this section rarely needs any attention. >>> >>> # You can safely leave it "as is." >>> >>> ###################################################### >>> >>> >>> >>> # Serial baud rate (usually 19200) >>> >>> baudrate = 19200 >>> >>> >>> >>> # TCP port (when using the WeatherLinkIP) >>> >>> tcp_port = 22222 >>> >>> >>> >>> # TCP send delay (when using the WeatherLinkIP): >>> >>> tcp_send_delay = 0.5 >>> >>> >>> >>> # The id of your ISS station (usually 1). If you use a wind meter >>> connected >>> >>> # to a anemometer transmitter kit, use its id >>> >>> iss_id = 1 >>> >>> >>> >>> # How long to wait for a response from the station before giving up >>> (in >>> >>> # seconds; must be greater than 2) >>> >>> timeout = 4 >>> >>> >>> >>> # How long to wait before trying again (in seconds) >>> >>> wait_before_retry = 1.2 >>> >>> >>> >>> # How many times to try before giving up: >>> >>> max_tries = 4 >>> >>> >>> >>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>> >>> model_type = 2 >>> >>> >>> >>> # The driver to use: >>> >>> driver = weewx.drivers.vantage >>> >>> >>> >>> ############################################################################## >>> >>> >>> # This section is for uploading data to Internet sites >>> >>> >>> [StdRESTful] >>> >>> >>> >>> [[StationRegistry]] >>> >>> # To register this weather station with weewx, set this to true >>> >>> register_this_station = false >>> >>> >>> >>> [[AWEKAS]] >>> >>> # This section is for configuring posts to AWEKAS. >>> >>> >>> >>> # If you wish to do this, set the option 'enable' to true, >>> >>> # and specify a username and password. >>> >>> enable = false >>> >>> username = XXX obfuscated by wee_debug XXX >>> >>> # To guard against parsing errors, put your password in quotes: >>> >>> password = XXX obfuscated by wee_debug XXX >>> >>> >>> >>> [[CWOP]] >>> >>> # This section is for configuring posts to CWOP. >>> >>> >>> >>> # If you wish to do this, set the option 'enable' to true, >>> >>> # and specify the station ID (e.g., CW1234). >>> >>> enable = false >>> >>> station = XXX obfuscated by wee_debug XXX >>> >>> >>> >>> # If this is an APRS (radio amateur) station, uncomment >>> >>> # the following and replace with a passcode (e.g., 12345). >>> >>> #passcode = replace_me (APRS stations only) >>> >>> >>> >>> [[PWSweather]] >>> >>> # This section is for configuring posts to PWSweather.com. >>> >>> >>> >>> # If you wish to do this, set the option 'enable' to true, >>> >>> # and specify a station and password. >>> >>> enable = false >>> >>> station = XXX obfuscated by wee_debug XXX >>> >>> # To guard against parsing errors, put your password in quotes: >>> >>> password = XXX obfuscated by wee_debug XXX >>> >>> >>> >>> [[WOW]] >>> >>> # This section is for configuring posts to WOW. >>> >>> >>> >>> # If you wish to do this, set the option 'enable' to true, >>> >>> # and specify a station and password. >>> >>> enable = false >>> >>> station = XXX obfuscated by wee_debug XXX >>> >>> # To guard against parsing errors, put your password in quotes: >>> >>> password = XXX obfuscated by wee_debug XXX >>> >>> >>> >>> [[Wunderground]] >>> >>> # This section is for configuring posts to the Weather >>> Underground. >>> >>> >>> >>> # If you wish to do this, set the option 'enable' to true, >>> >>> # and specify a station (e.g., 'KORHOODR3') and password. >>> >>> enable = false >>> >>> station = XXX obfuscated by wee_debug XXX >>> >>> # To guard against parsing errors, put your password in quotes: >>> >>> password = XXX obfuscated by wee_debug XXX >>> >>> >>> >>> # Set the following to True to have weewx use the WU "Rapidfire" >>> >>> # protocol. Not all hardware can support it. See the User's >>> Guide. >>> >>> rapidfire = False >>> >>> >>> >>> ############################################################################## >>> >>> >>> # This section specifies what reports, using which skins, to generate. >>> >>> >>> [StdReport] >>> >>> >>> >>> # Where the skins reside, relative to WEEWX_ROOT >>> >>> SKIN_ROOT = skins >>> >>> >>> >>> # Where the generated reports should go, relative to WEEWX_ROOT >>> >>> #HTML_ROOT = public_html >>> >>> #~~~~24-Mar-18 JFK - Ramdisk root >>> >>> HTML_ROOT = /var/weewx/public_html >>> >>> >>> >>> # The database binding indicates which data should be used in >>> reports. >>> >>> data_binding = wx_binding >>> >>> >>> >>> # Each of the following subsections defines a report that will be >>> run. >>> >>> >>> >>> [[StandardReport]] >>> >>> # See the customizing guide to change the units, plot types and >>> line >>> >>> # colors, modify the fonts, display additional sensor data, and >>> other >>> >>> # customizations. Many of those changes can be made here by >>> overriding >>> >>> # parameters, or by modifying templates within the skin itself. >>> >>> >>> >>> # The StandardReport uses the 'Standard' skin, which contains the >>> >>> # images, templates and plots for the report. >>> >>> skin = Standard >>> >>> [[[Units]]] >>> >>> [[[[Groups]]]] >>> >>> group_altitude = foot >>> >>> group_speed2 = mile_per_hour2 >>> >>> group_pressure = inHg >>> >>> group_rain = inch >>> >>> group_rainrate = inch_per_hour >>> >>> group_temperature = degree_F >>> >>> group_degree_day = degree_F_day >>> >>> group_speed = mile_per_hour >>> >>> [[dcrskin]] >>> >>> HTML_ROOT = /var/weewx/public_html/dcrskin >>> >>> skin = dcrskin >>> >>> [[[Extras]]] >>> >>> current = INST_SKIN_ROOT/dcrskin/current.inc >>> >>> hilo = INST_SKIN_ROOT/dcrskin/hilo.inc >>> >>> >>> >>> [[FTP]] >>> >>> # FTP'ing the results to a webserver is treated as just another >>> report, >>> >>> # albeit one with an unusual report generator! >>> >>> skin = Ftp >>> >>> >>> >>> # If you wish to use FTP, uncomment and fill out the next four >>> lines. >>> >>> #user = replace with the ftp username >>> >>> #password = replace with the ftp password; put in quotes to >>> guard against parsing errors. >>> >>> #server = replace with the ftp server name, e.g, >>> www.threefools.org >>> >>> #path = replace with the ftp destination directory (e.g., >>> /weather) >>> >>> >>> >>> # Set to True for an FTP over TLS (FTPS) connection. Not all >>> servers >>> >>> # support this. >>> >>> secure_ftp = False >>> >>> >>> >>> # To upload files from something other than what HTML_ROOT is set >>> >>> # to above, specify a different HTML_ROOT here. >>> >>> #HTML_ROOT = public_html >>> >>> >>> >>> # Most FTP servers use port 21 >>> >>> port = 21 >>> >>> >>> >>> # Set to 1 to use passive mode, zero for active mode >>> >>> passive = 1 >>> >>> >>> >>> [[RSYNC]] >>> >>> # rsync'ing to a webserver is treated as just another report >>> >>> skin = Rsync >>> >>> >>> >>> # If you wish to use rsync, you must configure passwordless ssh >>> usi >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
