Thanks for the reply I am using wlink 0.14
I had migrated from Weatherlink 1.0 to 2.0 successfully prior to stopping using weewx-wlink on the Mac. I was using it when the user change from account ID to station iD and password remaining as the account holders. For your information I recently received the attached from weatherlink: Hello John Cheesbrough, Thank you for requesting Davis Instruments API access. I have provided examples for both JSON and XML formats below. Please do not distribute your code to anyone outside of your private business. Note that your unique apiToken will be used with the EnviroMonitor Gateway, Vantage Connect or WeatherLink IP DID into “user=” and system owners Password into “pass=” as demonstrated below. The API call for an EnviroMonitor system will only output the Sensor Suite data that is attached to the EnviroMonitor Gateway. Here is an example of the API call and a link to the XML format using a sample apiToken. Data will be available at a rate equal to your Archive Interval or Service Plan Update Interval. We request a maximum poll rate of ten minutes per station through the API. Please note that the password required in the API calls below is the password of the system owner, not shared users. https://api.weatherlink.com/v1/NoaaExt.xml?user=DID&pass=ownerPW&apiToken=tokenID Also, here is an example of the API call for station status info and meta data and a link to the XML format. The station status should not be polled but can be grabbed when needed for human initiated setup or diagnostic efforts. https://api.weatherlink.com/v1/StationStatus.xml?user=DID&pass=ownerPW&apiToken=tokenID Here is an example of the API call and link to the JSON format using a sample apiToken. Data will be available at a rate equal to your Archive Interval or Service Plan Update Interval. We request a maximum poll rate of ten minutes per station through the API. Please note that the password required in the API calls below is the password of the system owner, not shared users. https://api.weatherlink.com/v1/NoaaExt.json?user=DID&pass=ownerPW&apiToken=tokenID Also, here is an example of the API call for station status info and meta data and a link to the JSON format. The station status should not be polled but can be grabbed when needed for human initiated setup or diagnostic efforts. https://api.weatherlink.com/v1/StationStatus.json?user=DID&pass=ownerPW&apiToken=tokenID Please let us know if you have any difficulties or any other questions about this API. Many Thanks, Tech Support – TechSupport O: 510-732-7814 > On 17 Sep 2018, at 18:19, mwall <[email protected]> wrote: > > > >> On Monday, September 17, 2018 at 11:56:22 AM UTC-4, John Cheesbrough wrote: >> I have been running the wlink driver on a MacBook Pro successfully for a >> number of months but stopped doing so about a month ago when I deleted the >> database >> >> I recently decided to run it on my Raspberry Pi However I thought I would >> just check it still ran on the Mac first and also upgraded the weewx from >> 3.7.1 to 3.8.2. >> >> Having done this I found that I could not get Archive records but could get >> Loop records but they were different under each version of weewx. > > hi john, > > which version of the wlink driver are you using? i seem to recall making > some changes in the past year to deal with the change to weatherlink 2. > > your failed download attempts appear to be due to timeouts, which could be > due to local (or remote) network failures. but if that is a bogus/misleading > error message, lets figure it out. weatherlink.com/webdl.php is only one of > the URLs - data are obtained from www.weatherlink.com/user/xxx/index.php (i > think that is the url that changed?) > > one of the changes from 3.7.x to 3.8.x was to eliminate useless data in the > loop packets - we got a bit more precise about the difference between None > and nothing. notice that all of the 'missing' fields in the packets you > posted have observations with value of 'None'. > > search for 'None' in the changelog: > > http://weewx.com/downloads/README.txt > > also see the issue that brought the changes: > > https://github.com/weewx/weewx/issues/291 > > -- > You received this message because you are subscribed to a topic in the Google > Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/vkkejQrZFp4/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
