It seems that with the new driver everything is OK. I will inform you. Thank you!
El lunes, 24 de septiembre de 2018, 3:03:37 (UTC+2), Cameron D escribió: > > I have attached an updated WMR300 driver, based on v19rc6 from v3.8.2 > > The history clear has been reinstated, and an issue with the console > stopping data transmission has been fixed. > This is done simply by identifying when no data has been received for a > minute and issuing an instruction to restart sending data. > > To install: > Either: > * A.* you could rename it and overwrite the wmr300.py file in > weewx/drivers (having first made a backup) > or > *B*. (safer) > 1. copy the file into the "user" folder of the installation folder. > 2. edit the weewx.conf file to point to the new driver: in the [WMR300] > section, change > "driver = weewx.drivers.wmr300" > to "driver = user.wmr300-v19rc6+fix" > > > the driver has extra options that you can enable if necessary: > debug_history = 1 > debug_timing = 1 > > This code has been working continuously under weewx 3.8.0 for 6 months > with no hangs and many instances where it needed to restart the console. > I have a 1 minute history interval and clear at 6%, which means the > history clear runs approx every 32 hours. > > Cameron > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
