it WAS working, so i suspect a corrupt memory thanks, i will try the station hw reset, see if it helps
On Tuesday, October 2, 2018 at 7:41:45 PM UTC+2, mwall wrote: > > > > On Tuesday, October 2, 2018 at 1:26:53 PM UTC-4, Kenneth Due wrote: >> >> >> any hints ? >> >> > try turning up the debug. in your weewx configuration file: > > debug=1 > ... > [TE923] > debug_read = 1 > debug_write = 1 > debug_decode = 1 > > then run wee_device > > i have only ever seen two values for the memory size field: either 0 > (small memory size) or 2 (large memory size). it is possible that your > station has yet another memory configuration, or it is possible that the > memory in your station is corrupt. > > you could try doing a full reset of the station: > > - press and hold SNOOZE and UP for 4 seconds > - press SET button; main unit will beep > - wait until beeping stops > - remove batteries and wait 10 seconds > - reinstall batteries > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
