I do see that it's trying to copy to /home/weewx/public_html/belchertown which tells me you've installed from the tar file (and not from apt-get).
Most of the skin should be install agnostic, but maybe there's something getting gummed up with the tar install (I've seen it before). Let me do some testing on a vanilla system with the tar install and see how it goes. On Monday, November 26, 2018 at 4:39:25 PM UTC-5, Pat wrote: > > I noticed it said it moved 0 files too. Don't know why though - there is > no other information. In my standard report I have this below as an example > where both skins are copying data to the same html folder. > > I assume you have both skins outlined in weewx.conf similar to the below? > > I'm still a little lost since there's not much data to go off of quite > yet. > > [[Belchertown]] > skin = Belchertown > HTML_ROOT = /var/www/html/belchertown > [[[Extras]]] > logo_image = https:// > belchertownweather.com/images/content/btownwx-logo-slim.png > show_apptemp = 0 > show_windrun = 1 > forecast_enabled = 1 > darksky_secret_key = 123 > earthquake_enabled = 1 > > [[Highcharts_Belchertown]] > HTML_ROOT = /var/www/html/belchertown > skin = Highcharts_Belchertown > > > On Sunday, November 25, 2018 at 10:02:14 PM UTC-5, rich T wrote: >> >> Pat >> >> I don't mind being a beta tester. :) I cleaned up the extra newlines >> within weewx.conf file and restarted weewx and allowed to run several >> archive periods, the charts did not updated. I rebooted the RPI and >> allowed to run several archive periods, again the charts did not updated. >> What I do notice in the sys_log after the files for the >> Highcharts_Belchertown report are generated, zero files are being copied to >> the /home/weewx/public_html/belchertown. >> >> Nov 25 21:40:40 raspberrypi weewx[546]: cheetahgenerator: Generated 4 >> files for report Highcharts_Belchertown in 7.62 seconds >> Nov 25 21:40:40 raspberrypi weewx[546]: copygenerator: copied 0 files to >> /home/weewx/public_html/belchertown >> >> In the [[StandardReport]] does the skin need to point Belchertown? Could >> it point to Highcharts_Belchertown? >> >> Thanks >> Rich >> >> >> On Sunday, November 25, 2018 at 8:06:58 PM UTC-5, Pat wrote: >>> >>> 0.8 isn't released yet so I guess you've become a beta tester. :) >>> >>> You have 2 options. You can downgrade to the supported 0.7 release >>> <https://github.com/poblabs/weewx-belchertown/releases>, or we can try >>> to figure out what's wrong together. >>> >>> If you choose the latter, I notice your syslog doesn't show any glaring >>> errors. However, I do see some spacing in your weewx.conf which may be the >>> problem? >>> >>> Check out this link for a good config example within weewx.conf >>> <https://github.com/poblabs/weewx-belchertown#belchertown-skin-options> - >>> (e.g. removing the newline between skin = Belchertown and [[[Extras]]] >>> >>> Restart weewx when done and see what happens. >>> >>> >>> >>> On Sunday, November 25, 2018 at 6:14:30 PM UTC-5, rich T wrote: >>>> >>>> First of all, very nice skin design. Everything thing is working >>>> correctly except the Highcharts are not updating. I'm just updated 0.8 >>>> and >>>> still I have the same issues. One of my conf files must be incorrect, but >>>> I can't see where. Attached are the current config files with sys_log. >>>> >>>> Thanks >>>> Rich >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
