Pat Will check later this evening, when I get back home.
Rich On Tuesday, November 27, 2018 at 9:44:52 AM UTC-5, Pat wrote: > Gary, understood on all counts. My belief is that the copy generator will > copy the newly generated files by the report generator. In this case, it's > the 4 json files. This is how it's working in Belchertown 0.7, as well as > in 0.8rc1,2,3. I don't think I need to explicitly specify copy_always = > *.json. If this were the case, then the Standard skin would have copy_always > = *.html - which is does not. Further, my skin would have been broken > since 0.1. > > Aside from all of that, I did perform an install with the install.py, and > my syslog did return an error of a missing file. It doesn't seem to be > related, but still something I just fixed in a recent commit. > > Back to this issue: From an install using setup.py, I have installed the > Belchertown skin using /home/weewx/bin/wee_extension --install. My > weewx.conf is below: > > [[Highcharts_Belchertown]] > HTML_ROOT = public_html/belchertown > skin = Highcharts_Belchertown > [[Belchertown]] > HTML_ROOT = public_html/belchertown > skin = Belchertown > > > Upon issuing a /home/weewx/bin/wee_reports, I get the following: > > Nov 27 14:32:09 setuppy wee_reports[1473]: cheetahgenerator: Generated 4 > files for report Highcharts_Belchertown in 2.52 seconds > Nov 27 14:32:09 setuppy wee_reports[1473]: copygenerator: copied 0 files > to /home/weewx/public_html/belchertown > > > However, within /home/weewx/public_html/belchertown/json I have 4 json > files with a timestamp of 14:32. So it seems it IS copying them, but it's > saying it is NOT. > > The charts on the website are updated as well. > > And again at 9:40 (note my system is in UTC, so it shows 14:40): > > Nov 27 14:40:18 setuppy weewx[1689]: cheetahgenerator: Generated 4 files > for report Highcharts_Belchertown in 2.70 seconds > Nov 27 14:40:18 setuppy weewx[1689]: copygenerator: copied 0 files to / > home/weewx/public_html/belchertown > > root@setuppy:/home/weewx# ls -al /home/weewx/public_html/belchertown/json > total 3320 > drwxr-xr-x 2 root root 4096 Nov 27 14:40 . > drwxr-xr-x 11 root root 4096 Nov 27 14:40 .. > -rw-r--r-- 1 root root 4150 Nov 27 *14:40 day.**json* > -rw-r--r-- 1 root root 1035 Nov 27 14:32 earthquake.json > -rw-r--r-- 1 root root 14 Nov 27 14:40 index.html > -rw-r--r-- 1 root root 1961 Nov 27 *14:40 month.**json* > -rw-r--r-- 1 root root 2157 Nov 27 *14:40 week.**json* > -rw-r--r-- 1 root root 9995 Nov 27 14:40 weewx_data.json > -rw-r--r-- 1 root root 3353388 Nov 27 *14:40 year.**json* > > > And the charts have updated as well for 9:40. > > At this time I don't see anything wrong with Belchertown. Maybe a slight > cosmetic bug with the output of the copygenerator? > > > *Rich*, when you see the archive interval run and it says 0 files copied, > please confirm the timestamps on the files in bold above. Do they update? > > If you have MQTT disabled on your Belchertown skin, you will need to > refresh the page to see the updated charts. > > Let me know what happens. > > > > On Monday, November 26, 2018 at 9:25:34 PM UTC-5, gjr80 wrote: >> >> >> On Tuesday, 27 November 2018 12:09:05 UTC+10, Pat wrote: >>> >>> Ok your explanation is my understanding as well. Understood on Rich's >>> report of 0 files copied - which is why I'm lost as to why it's failing >>> since it should have 4 files to copy. The Belchertown highcharts skin >>> should create new json files every archive interval, which should be a >>> fresh copy to the HTML_DIR. >>> >> >> Now you are confusing me. You say 'it should have 4 files to copy', that >> implies to me you are expecting the report generator to generate 4 files >> then you are expecting them to be copied somewhere. Given the conversation >> centres on the copy generator I take it you are expecting the copy >> generator to copy these 4 .json files. The 4 files are in fact generated >> by the report generator, this is evidenced by: >> >> Nov 25 17:35:44 raspberrypi weewx[1619]: cheetahgenerator: Generated 4 >> files for report Highcharts_Belchertown in 6.84 seconds >> >> but the copy generator will never copy these files, the copy generator >> file specs in Highcharts_Belchertown skin config file do not match >> *.json files and as I said earlier a properly configured skin does not need >> such files to be copied. >> >> I'm sorry if this seems to be pedantic but when you start talking about >> copying files and copy generators etc you need to quite specific. >> >> >>> Unless there's a typo in a config, or something else, that's preventing >>> that from happening. My comment of "first I'm hearing of it" is in regards >>> to the 3 or so beta testers of 0.8 who haven't reported this issue. >>> >> >> In this case I think a bit of sleuthing might be needed on Rich' system >> to ensure the generated files content looks correct (do they have data), >> are saved (not copied) to the correct directory and then suitably made >> available (copied or via symlink) to the web server. Then make sure the JS >> is looking in the correct location for the .json files. >> >> Gary >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
