192.168.0.4 is a local IP that has the weewx installed and data pulled from the station but the website itself is served to the public with a outside IP 63.230.134.161 via a reverse proxy
see http://www.nettletondistrict.com/Nettleton/ it works fine doing a reverse proxy for everything but the MQTT so far. On Thursday, December 27, 2018 at 5:03:34 PM UTC-8, Pat wrote: > > I'm not sure what is causing that. Might be best to start from the basics > again. Check out my article to compare your settings, read the descriptions > again, and also check out the skin options to make sure you're not missing > something. > > Is your broker or weewx available to the public? > > > On Thursday, December 27, 2018 at 7:56:44 PM UTC-5, Scott Grayban wrote: >> >> Shit.....mosquitto.log is showing Socket error on client <unknown>, >> disconnecting. >> >> 1545958518: New connection from 192.168.0.4 on port 1883. >> 1545958518: New client connected from 192.168.0.4 as >> d413f626-b78b-4bca-8e99-43861d26dc6a (c1, k60, u'weewx'). >> 1545958518: Client d413f626-b78b-4bca-8e99-43861d26dc6a disconnected. >> 1545958520: New connection from 63.230.134.161 on port 1883. >> 1545958520: *Socket error on client <unknown>, disconnecting.* >> 1545958533: New connection from 192.168.0.4 on port 1883. >> >> >> On Thursday, December 27, 2018 at 4:52:22 PM UTC-8, Pat wrote: >>> >>> Looks good >>> >>> On Thursday, December 27, 2018 at 7:50:49 PM UTC-5, Scott Grayban wrote: >>>> >>>> Is my /etc/mosquitto/acl correct ? Or do I need to change those values ? >>>> >>>> # Allow anonymous access to the sys >>>> topic read $SYS/# >>>> # Allow anonymous to read weather >>>> topic read weather/# >>>> # weewx readwrite to the loop >>>> user weewx >>>> topic weather/# >>>> >>>> >>>> On Thursday, December 27, 2018 at 4:43:02 PM UTC-8, Pat wrote: >>>>> >>>>> Ok, there's a few more things not quite right. >>>>> >>>>> 1. MQTT is very picky about it's config file. Change your >>>>> myconfig.conf so that there is no space between listener 1883 and >>>>> protocol >>>>> mqtt. See my post from last night above a few. >>>>> >>>>> listener 1883 >>>>> protocol mqtt >>>>> >>>>> Restart your mosquitto - or to be safe, restart your MQTT server. >>>>> >>>>> 2. Once it's back up and weewx says it's posting, can you verify from >>>>> your computer that MQTT is wokring? You can use a program like MQTT >>>>> Spy >>>>> <https://github.com/eclipse/paho.mqtt-spy/releases/download/1.0.0/mqtt-spy-1.0.0.jar> >>>>> on >>>>> Windows if you have Java installed. >>>>> >>>>> 3. In MQTT, the # is only used for debugging. You really don't want to >>>>> publish or subscribe to this special topic. >>>>> >>>>> Under [[MQTT]] change >>>>> >>>>> topic = weather/weewx >>>>> >>>>> Under Belchertown [[[Extras]]] change >>>>> >>>>> mqtt_topic = weather/weewx/loop >>>>> >>>>> Restart weewx >>>>> >>>>> >>>>> On Thursday, December 27, 2018 at 7:36:18 PM UTC-5, Scott Grayban >>>>> wrote: >>>>> >>>>>> Ok getting close..... >>>>>> >>>>>> in EXTRAS I have >>>>>> >>>>>> mqtt_enabled = 1 >>>>>> mqtt_host = 192.168.0.4 >>>>>> mqtt_topic = weather/# >>>>>> mqtt_port = 1883 >>>>>> mqtt_ssl = 0 >>>>>> disconnect_live_website_visitor = 1800000 >>>>>> >>>>>> >>>>>> which now is giving *Failed connecting to the weather station. >>>>>> Please try again later!* >>>>>> >>>>>> I am pretty sure I have MQTT right >>>>>> >>>>>> On Thursday, December 27, 2018 at 4:24:08 PM UTC-8, Pat wrote: >>>>>>> >>>>>>> Under [[[Extras]]] you don't have any of the skin specific MQTT >>>>>>> settings >>>>>>> <https://github.com/poblabs/weewx-belchertown#mqtt-for-real-time-streaming-options>. >>>>>>> >>>>>>> At a minimum you need mqtt_enabled, which you have, but also mqtt_host >>>>>>> and mqtt_topic. >>>>>>> >>>>>>> As mentioned previously, weewx is posting to your MQTT broker using >>>>>>> [[MQTT]], the skin also needs to know where the broker is so it can get >>>>>>> that data too and that's done in [[Belchertown]] [[[Extras]]]. >>>>>>> >>>>>>> On Thursday, December 27, 2018 at 7:21:33 PM UTC-5, Scott Grayban >>>>>>> wrote: >>>>>>>> >>>>>>>> [[Belchertown]] >>>>>>>> HTML_ROOT = /home/weewx/public_html/Nettleton >>>>>>>> skin = Nettleton >>>>>>>> [[[Extras]]] >>>>>>>> belchertown_root_url = http:// >>>>>>>> www.nettletondistrict.com/Nettleton >>>>>>>> logo_image = http:// >>>>>>>> www.nettletondistrict.com/Nettleton/images/map_of_spokane_wa.jpg >>>>>>>> site_title = Nettleton District Weather Station >>>>>>>> footer_copyright_text = "Nettleton District Weather >>>>>>>> Station, Spokane, Washington" >>>>>>>> radar_html = "<img src=' >>>>>>>> http://radar.weather.gov/lite/N0R/OTX_loop.gif'>" >>>>>>>> mqtt_enabled = 1 >>>>>>>> show_apptemp = 1 >>>>>>>> show_windrun = 1 >>>>>>>> highcharts_show_apptemp = 1 >>>>>>>> forecast_enabled = 1 >>>>>>>> darksky_secret_key = XXXXXX >>>>>>>> earthquake_enabled = 1 >>>>>>>> facebook_enabled = 1 >>>>>>>> twitter_enabled = 1 >>>>>>>> graphs_page_header = "Weather Observation Graphs" >>>>>>>> records_page_header = "Weather Observation Records" >>>>>>>> reports_page_header = "Weather Observation Reports" >>>>>>>> about_page_header = "About This Weather Station" >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Thursday, December 27, 2018 at 4:15:22 PM UTC-8, Pat wrote: >>>>>>>>> >>>>>>>>> Please post your Belchertown skin settings. >>>>>>>>> >>>>>>>>> On Thursday, December 27, 2018 at 7:00:21 PM UTC-5, Scott Grayban >>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Ok so my weewx.conf looks like this now.... >>>>>>>>>> [[MQTT]] >>>>>>>>>> server_url = mqtt://weewx:passwordXXXXX@192.168.0.4:1883/ >>>>>>>>>> topic = weather/# >>>>>>>>>> unit_system = US >>>>>>>>>> binding = archive, loop >>>>>>>>>> aggregation = aggregate >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> My /etc/mosquitto/conf.d/myconfig.conf looks like this >>>>>>>>>> persistence false >>>>>>>>>> allow_anonymous true >>>>>>>>>> password_file /etc/mosquitto/passwd >>>>>>>>>> acl_file /etc/mosquitto/acl >>>>>>>>>> >>>>>>>>>> listener 1883 >>>>>>>>>> protocol mqtt >>>>>>>>>> >>>>>>>>>> # websockets >>>>>>>>>> listener 9001 >>>>>>>>>> protocol websockets >>>>>>>>>> >>>>>>>>>> Still not connecting..... I wonder if thats do to the reverse >>>>>>>>>> proxy with apache ? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Thursday, December 27, 2018 at 5:31:22 AM UTC-8, Pat wrote: >>>>>>>>>>> >>>>>>>>>>> This is because your MQTT is isolated to localhost only. Local >>>>>>>>>>> host in this case would be your weewx server, which you must have >>>>>>>>>>> installed >>>>>>>>>>> MQTT on as well. Which works for weewx ==> MQTT since they are on >>>>>>>>>>> the same >>>>>>>>>>> system, but nothing else >>>>>>>>>>> >>>>>>>>>>> First, change your MQTT to listen on 1883 for external >>>>>>>>>>> connections. Since you're not using SSL, you can remove the 8883, >>>>>>>>>>> update >>>>>>>>>>> your myconfig.conf with this. >>>>>>>>>>> >>>>>>>>>>> listener 1883 >>>>>>>>>>> protocol mqtt >>>>>>>>>>> >>>>>>>>>>> With this change it'll open port 1883 to external connections >>>>>>>>>>> like your laptop. >>>>>>>>>>> >>>>>>>>>>> You can leave your weewx.conf [[MQTT]] config alone since they >>>>>>>>>>> are on the same machine, localhost will work here like it already >>>>>>>>>>> is. >>>>>>>>>>> >>>>>>>>>>> I don't see your skin options so I think you haven't done that. >>>>>>>>>>> You're posting to MQTT with [[MQTT]], but now you need to retrieve >>>>>>>>>>> - that's >>>>>>>>>>> what the skin does. >>>>>>>>>>> >>>>>>>>>>> In weewx.conf you need to specify the Belchertown skin options >>>>>>>>>>> for MQTT such as enabling it, hostname, topic, etc. >>>>>>>>>>> <https://github.com/poblabs/weewx-belchertown#mqtt-for-real-time-streaming-options> >>>>>>>>>>> You >>>>>>>>>>> cannot use localhost here for mqtt_host, you need to specify >>>>>>>>>>> the IP of the server hosting your MQTT. By saying 127.0.0.1 or >>>>>>>>>>> localhost >>>>>>>>>>> that means Chrome is going to try to connect to YOUR PC for MQTT >>>>>>>>>>> data which >>>>>>>>>>> probably doesn't exist. You need to specify the IP of the MQTT >>>>>>>>>>> broker, like >>>>>>>>>>> 192.168.1.100 or whatever. This is where having a static IP or a >>>>>>>>>>> DHCP >>>>>>>>>>> reservation is important so the IP of your internal broker doesn't >>>>>>>>>>> change. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Thursday, December 27, 2018 at 2:38:06 AM UTC-5, Scott >>>>>>>>>>> Grayban wrote: >>>>>>>>>>>> >>>>>>>>>>>> Pat >>>>>>>>>>>> >>>>>>>>>>>> I seem to have missed something in setting up MQTT for the >>>>>>>>>>>> skin... I followed >>>>>>>>>>>> https://obrienlabs.net/how-to-setup-your-own-mqtt-broker/ >>>>>>>>>>>> except the SLL stuff since I wouldn't need it. >>>>>>>>>>>> >>>>>>>>>>>> weewx.conf >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> [[MQTT]] >>>>>>>>>>>> server_url = mqtt://weewx:xxxxxx@127.0.0.1:1883/ >>>>>>>>>>>> topic = weather/# >>>>>>>>>>>> unit_system = US >>>>>>>>>>>> binding = archive, loop >>>>>>>>>>>> aggregation = aggregate >>>>>>>>>>>> >>>>>>>>>>>> and >>>>>>>>>>>> >>>>>>>>>>>> # cat /etc/mosquitto/conf.d/myconfig.conf >>>>>>>>>>>> persistence false >>>>>>>>>>>> >>>>>>>>>>>> allow_anonymous true >>>>>>>>>>>> password_file /etc/mosquitto/passwd >>>>>>>>>>>> >>>>>>>>>>>> acl_file /etc/mosquitto/acl >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> listener 1883 localhost >>>>>>>>>>>> listener 8883 >>>>>>>>>>>> protocol mqtt >>>>>>>>>>>> >>>>>>>>>>>> # websockets >>>>>>>>>>>> listener 9001 >>>>>>>>>>>> protocol websockets >>>>>>>>>>>> >>>>>>>>>>>> # cat /etc/mosquitto/acl >>>>>>>>>>>> # Allow anonymous access to the sys >>>>>>>>>>>> topic read $SYS/# >>>>>>>>>>>> >>>>>>>>>>>> # Allow anonymous to read weather >>>>>>>>>>>> topic read weather/# >>>>>>>>>>>> >>>>>>>>>>>> # weewx readwrite to the loop >>>>>>>>>>>> user weewx >>>>>>>>>>>> topic weather/# >>>>>>>>>>>> >>>>>>>>>>>> This test line works >>>>>>>>>>>> >>>>>>>>>>>> mosquitto_pub -h localhost -t "weather/test" -m "hello world. >>>>>>>>>>>> this is to the weather topic with authentication" -u weewx -P >>>>>>>>>>>> xxxxxx >>>>>>>>>>>> >>>>>>>>>>>> But index page is showing *Connecting to weather station real >>>>>>>>>>>> time data.* >>>>>>>>>>>> >>>>>>>>>>>> MQTT is posting..... >>>>>>>>>>>> >>>>>>>>>>>> Dec 26 23:19:39 raspberrypi weewx[6544]: restx: MQTT: Published >>>>>>>>>>>> record 2018-12-26 23:19:39 PST (1545895179) >>>>>>>>>>>> Dec 26 23:19:45 raspberrypi weewx[6544]: restx: MQTT: Published >>>>>>>>>>>> record 2018-12-26 23:19:45 PST (1545895185) >>>>>>>>>>>> >>>>>>>>>>>> So I don't know what I did worng. I restraced all steps and I >>>>>>>>>>>> did it correctly. >>>>>>>>>>>> >>>>>>>>>>>> On Friday, December 7, 2018 at 2:12:23 PM UTC-8, Pat wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> The last thread was getting a bit long. So I've started a new >>>>>>>>>>>>> one. >>>>>>>>>>>>> >>>>>>>>>>>>> Belchertown Skin 0.8.1 has been released which fixes a couple >>>>>>>>>>>>> of bugs. See the release notes, and install instructions here: >>>>>>>>>>>>> >>>>>>>>>>>>> https://github.com/poblabs/weewx-belchertown/releases >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
