With a new install using apt-get, I was able to get the driver to run with
this config.
I don't have the hardware so nothing happens.
[Station]
# Description of the station location
location = "byows"
# Latitude and longitude in decimal degrees
latitude = 90.000
longitude = 0.000
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 0, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
#station_type = Simulator
station_type = BYOWS
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[BYOWS]
# This section is for the Raspberry Pi Bring Your Own Weather Station
driver.
# The driver to use
driver = user.byows
On Monday, December 31, 2018 at 2:38:07 PM UTC-5, gjr80 wrote:
>
> user.BYOWS and user.byows are two different things. You have been using
> user.BYOWS in weewx.conf yet you have a file user/byows.py. Try using
> user.byows in weewx.conf.
>
> Gary
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
