So rtl_433 is seeing the sensor but is that the output from: cd /home/weewx sudo PYTHONPATH=bin python bin/user/sdr.py --cmd="rtl_433 -q -U -F json -G"
or some other command ? Sorry if I seem to be pedantic. Also, any chance you could post screen captures as text (eg SSH into your RPi using PuTTY or such and copy/paste the text) rather than an image. Far easier this end to read, especially if not on a PC. Gary On Thursday, 3 January 2019 11:17:47 UTC+10, Charlie Thompson wrote: > > Sorry about that image...but yes when I run rtl_433 command there is rain > fall data there. > (see attached screen shot of rtl_433 running) > > -Charlie > > > > > On Wednesday, January 2, 2019 at 6:57:50 PM UTC-6, gjr80 wrote: >> >> Charlie, >> >> Code and config only give part of the picture. Have you run the driver >> directly <https://github.com/matthewwall/weewx-sdr> (step 4) to see what >> sensors the sdr is able to see? In your posts so far I have only seen >> config info and no sdr output. Once we know exactly what sensors you are >> seeing the config should fall into place. Without the details of available >> sensors you are running blind. >> >> Gary >> >> On Thursday, 3 January 2019 10:36:46 UTC+10, Charlie Thompson wrote: >>> >>> Everything is working but I'm *not *getting the rain gauge data...at >>> all. >>> Attached are my *sdr.py* and *weewx.conf* files. >>> There must be something wrong in one of them! >>> >>> *From the Acurite 5n1 senso*r: >>> >>> Wind speed works >>> Wind direction works >>> Humidity works >>> Temperature works >>> Rain gauge does *NOT *work. >>> >>> Any help appreciated. >>> >>> Thanks, >>> -Charlie >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
