Here is my sensor map for my Bresser 5-in-1
[SDR]
# This section is for the software-defined radio driver.
# The driver to use
driver = user.sdr
cmd = /usr/local/bin/rtl_433 -f 868.3M -R 119 -F json
[[sensor_map]]
outTemp = temperature.118.Bresser5in1Packet
outHumidity = humidity.118.Bresser5in1Packet
windSpeed = wind_speed.118.Bresser5in1Packet
windDir = wind_dir.118.Bresser5in1Packet
windGust = wind_gust.118.Bresser5in1Packet
rain_total = rain_total.118.Bresser5in1Packet
log_unknown_sensors = True
log_unmapped_sensors = True
[[deltas]]
rain = rain_total
On Tuesday, 15 January 2019 21:36:37 UTC, U G wrote:
>
> Hi,
>
> I used weewx way ago until I was moving to another place, but those times
> it was with a directly (USB) attached Oregon Scientific Weather station.
>
> Now I changed to a "Bresser 5 in 1" and a RTL-SDR for receiving, whicht
> works pretty well, besides I have some configuration issues with the Sensor
> mapping, it seems...
>
> Debugging on, you can clearkly see rtl_433 is catching every trasmitted
> information, even wind_speed, wind_gust and wind_dir_deg, rain_mm and so on:
>
> Jan 15 22:25:03 z8300 weewx[16176]: sdr: MainThread: lines=['{"time" :
> "2019-01-15 22:25:00", "model" : "Bresser-5in1", "id" : 204,
> "temperature_C" : 5.300, "humidity" : 97, "wind_gust" : 1.400, "wind_speed"
> : 1.300, "wind_dir_deg" : 247.500, "rain_mm" : 72.800, "data" :
> "e3337feb4fecefacff68d7f8ff1ccc8014b01310530097280700", "mic" :
> "CHECKSUM"}\n']
>
> But in the next line you see that not all values are gathered by the
> sdr.py: ('windSpeed': None, 'windGust': None, 'rain_total': None,):
>
> Jan 15 22:25:03 z8300 weewx[16176]: sdr: MainThread:
> packet={'outHumidity': 97.0, 'dateTime': 1547591100, 'windDir': 247.5,
> 'outTemp': 5.3, 'windSpeed': None, 'windGust': None, 'rain_total': None,
> 'usUnits': 17}
> Jan 15 22:25:06 z8300 weewx[16176]: sdr: MainThread: lines=[]
> Jan 15 22:25:09 z8300 weewx[16176]: sdr: MainThread: lines=[]
>
> I don't really understand how come, because my Sensor mapping seems to be
> correct:
>
>
> [[sensor_map]]
> windDir = wind_dir_deg.204.Bresser5in1Packet
> windGust = wind_gust.204.Bresser5in1Packet
> windSpeed = wind_speed.204.Bresser5in1Packet
> outTemp = temperature.204.Bresser5in1Packet
> outHumidity = humidity.204.Bresser5in1Packet
> rain_total = rain_mm.204.Bresser5in1Packet
>
> Or do I miss something?
>
> Thanks a a lot for your help!
>
> Cheers
>
> UG
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
