Hi,
Thanks for taking a look Gary.
The log and config are below. Since it is hard to tell and verify from the
config file here is the mapping of the tokens, secrets, etc from the
'Twitter' names proper to the 'Weewx Twitter' names:
oauth_token_secret = (Access token secret)
oauth_token = (Access token)
app_key_secret = (API secret key)
app_key = (API key)
Thanks,
Robb
======== log begin ========
Jan 19 13:51:07 weewx weewx[4388]: engine: Initializing weewx version 3.8.2
Jan 19 13:51:07 weewx weewx[4388]: engine: Using Python 2.7.9 (default, Sep
26 2018, 05:58:52) #012[GCC 4.9.2]
Jan 19 13:51:07 weewx weewx[4388]: engine: Platform
Linux-4.9.35+-armv6l-with-debian-8.0
Jan 19 13:51:07 weewx weewx[4388]: engine: Locale is 'en_GB.UTF-8'
Jan 19 13:51:07 weewx weewx[4388]: engine: Using configuration file
/etc/weewx/weewx.conf
Jan 19 13:51:07 weewx weewx[4388]: engine: Debug is 1
Jan 19 13:51:08 weewx weewx[4388]: engine: Initializing engine
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading station type Vantage
(weewx.drivers.vantage)
Jan 19 13:51:08 weewx weewx[4388]: vantage: Driver version is 3.0.11
Jan 19 13:51:08 weewx weewx[4388]: vantage: Opened up serial port
/dev/ttyUSB0; baud 19200; timeout 4.00
Jan 19 13:51:08 weewx weewx[4388]: vantage: Gentle wake up of console
successful
Jan 19 13:51:08 weewx weewx[4388]: vantage: Hardware type is 16
Jan 19 13:51:08 weewx weewx[4388]: vantage: ISS ID is 1
Jan 19 13:51:08 weewx weewx[4388]: vantage: Hardware name: Vantage Pro2
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.engine.StdTimeSynch
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.engine.StdTimeSynch
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.engine.StdConvert
Jan 19 13:51:08 weewx weewx[4388]: engine: StdConvert target unit is 0x1
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.engine.StdConvert
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.engine.StdCalibrate
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.engine.StdCalibrate
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.engine.StdQC
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.engine.StdQC
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.wxservices.StdWXCalculate
Jan 19 13:51:08 weewx weewx[4388]: wxcalculate: The following values will
be calculated: barometer=prefer_hardware, windchill=prefer_hardware,
dewpoint=prefer_hardware, appTemp=prefer_hardware,
rainRate=prefer_hardware, windrun=prefer_hardware,
heatindex=prefer_hardware, maxSolarRad=prefer_hardware,
humidex=prefer_hardware, pressure=prefer_hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
Jan 19 13:51:08 weewx weewx[4388]: wxcalculate: The following algorithms
will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.wxservices.StdWXCalculate
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.engine.StdArchive
Jan 19 13:51:08 weewx weewx[4388]: engine: Archive will use data binding
wx_binding
Jan 19 13:51:08 weewx weewx[4388]: engine: Record generation will be
attempted in 'hardware'
Jan 19 13:51:08 weewx weewx[4388]: engine: Using archive interval of 300
seconds (specified by hardware)
Jan 19 13:51:08 weewx weewx[4388]: engine: Use LOOP data in hi/low
calculations: 1
Jan 19 13:51:08 weewx weewx[4388]: manager: Daily summary version is 2.0
Jan 19 13:51:08 weewx weewx[4388]: engine: Using binding 'wx_binding' to
database 'weewx.sdb'
Jan 19 13:51:08 weewx weewx[4388]: manager: Starting backfill of daily
summaries
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.engine.StdArchive
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.restx.StdStationRegistry
Jan 19 13:51:08 weewx weewx[4388]: restx: StationRegistry: Registration not
requested.
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.restx.StdStationRegistry
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.restx.StdWunderground
Jan 19 13:51:08 weewx weewx[4388]: restx: Wunderground: Posting not enabled.
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.restx.StdWunderground
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.restx.StdPWSweather
Jan 19 13:51:08 weewx weewx[4388]: restx: PWSweather: Posting not enabled.
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.restx.StdPWSweather
Jan 19 13:51:08 weewx weewx[4388]: engine: Loading service
weewx.restx.StdCWOP
Jan 19 13:51:08 weewx weewx[4388]: restx: CWOP: Posting not enabled.
Jan 19 13:51:08 weewx weewx[4388]: engine: Finished loading service
weewx.restx.StdCWOP
Jan 19 13:51:09 weewx weewx[4388]: engine: Loading service
weewx.restx.StdWOW
Jan 19 13:51:09 weewx weewx[4388]: restx: WOW: Posting not enabled.
Jan 19 13:51:09 weewx weewx[4388]: engine: Finished loading service
weewx.restx.StdWOW
Jan 19 13:51:09 weewx weewx[4388]: engine: Loading service
weewx.restx.StdAWEKAS
Jan 19 13:51:09 weewx weewx[4388]: restx: AWEKAS: Posting not enabled.
Jan 19 13:51:09 weewx weewx[4388]: engine: Finished loading service
weewx.restx.StdAWEKAS
Jan 19 13:51:09 weewx weewx[4388]: engine: Loading service
user.twitter.Twitter
Jan 19 13:51:39 weewx weewx[4388]: restx: Twitter: service version is 0.12
Jan 19 13:51:39 weewx rsyslogd-2007: action 'action 17' suspended, next
retry is Sat Jan 19 13:53:09 2019 [try http://www.rsyslog.com/e/2007 ]
Jan 19 13:51:39 weewx weewx[4388]: restx: Twitter: binding is archive
Jan 19 13:51:39 weewx weewx[4388]: restx: Twitter: Data will be tweeted for
Burning Tree Estates, Bethesda, Maryland, USA
Jan 19 13:51:39 weewx weewx[4388]: engine: Finished loading service
user.twitter.Twitter
Jan 19 13:51:39 weewx weewx[4388]: engine: Loading service
weewx.engine.StdPrint
Jan 19 13:51:39 weewx weewx[4388]: engine: Finished loading service
weewx.engine.StdPrint
Jan 19 13:51:39 weewx weewx[4388]: engine: Loading service
weewx.engine.StdReport
Jan 19 13:51:39 weewx weewx[4388]: engine: Finished loading service
weewx.engine.StdReport
Jan 19 13:51:39 weewx weewx[4388]: engine: Starting up weewx version 3.8.2
Jan 19 13:51:39 weewx weewx[4388]: vantage: Gentle wake up of console
successful
Jan 19 13:51:39 weewx weewx[4388]: engine: Clock error is -4.92 seconds
(positive is fast)
Jan 19 13:51:39 weewx weewx[4388]: vantage: Getting archive packets since
2000-01-23 12:50:00 EST (948649800)
Jan 19 13:51:39 weewx weewx[4388]: vantage: Gentle wake up of console
successful
Jan 19 13:51:40 weewx weewx[4388]: vantage: Retrieving 246 page(s);
starting index= 3
Jan 19 13:51:40 weewx weewx[4388]: vantage: DMPAFT complete: page timestamp
******* N/A ******* ( N/A ) less than final timestamp 2000-01-23
12:50:00 EST (948649800)
Jan 19 13:51:40 weewx weewx[4388]: vantage: Catch up complete.
Jan 19 13:51:40 weewx weewx[4388]: engine: Starting main packet loop.
Jan 19 13:51:41 weewx weewx[4388]: vantage: Gentle wake up of console
successful
Jan 19 13:51:41 weewx weewx[4388]: vantage: Requesting 200 LOOP packets.
Jan 19 13:51:41 weewx weewx[4388]: vantage: Gentle wake up of console
successful
Jan 19 13:55:15 weewx weewx[4388]: vantage: Getting archive packets since
2000-01-23 12:50:00 EST (948649800)
Jan 19 13:55:15 weewx rsyslogd-2007: action 'action 17' suspended, next
retry is Sat Jan 19 13:56:45 2019 [try http://www.rsyslog.com/e/2007 ]
Jan 19 13:55:20 weewx weewx[4388]: vantage: Retry #0 failed
Jan 19 13:55:20 weewx weewx[4388]: vantage: Rude wake up of console
successful
Jan 19 13:55:21 weewx weewx[4388]: vantage: Retrieving 246 page(s);
starting index= 3
Jan 19 13:55:21 weewx weewx[4388]: vantage: DMPAFT complete: page timestamp
******* N/A ******* ( N/A ) less than final timestamp 2000-01-23
12:50:00 EST (948649800)
Jan 19 13:55:21 weewx weewx[4388]: vantage: Catch up complete.
Jan 19 13:55:21 weewx weewx[4388]: vantage: Requesting 200 LOOP packets.
Jan 19 13:55:21 weewx weewx[4388]: reportengine: Running reports for latest
time in the database.
Jan 19 13:55:21 weewx weewx[4388]: reportengine: Running report
StandardReport
Jan 19 13:55:21 weewx weewx[4388]: vantage: Gentle wake up of console
successful
Jan 19 13:55:21 weewx weewx[4388]: reportengine: Found configuration file
/etc/weewx/skins/Standard/skin.conf for report StandardReport
Jan 19 13:55:22 weewx weewx[4388]: cheetahgenerator: using search list
['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station',
'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats',
'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras']
Jan 19 13:55:22 weewx weewx[4388]: manager: Daily summary version is 2.0
Jan 19 13:55:52 weewx weewx[4388]: cheetahgenerator: Generated 14 files for
report StandardReport in 30.43 seconds
Jan 19 13:55:53 weewx weewx[4388]: manager: Daily summary version is 2.0
Jan 19 13:55:58 weewx weewx[4388]: imagegenerator: Generated 12 images for
StandardReport in 5.58 seconds
Jan 19 13:55:58 weewx weewx[4388]: copygenerator: copied 9 files to
/var/www/html/weewx
Jan 19 13:55:58 weewx weewx[4388]: reportengine: Running report FTP
Jan 19 13:55:58 weewx weewx[4388]: reportengine: Found configuration file
/etc/weewx/skins/Ftp/skin.conf for report FTP
Jan 19 13:55:58 weewx weewx[4388]: ftpgenerator: FTP upload not requested.
Skipped.
Jan 19 13:55:58 weewx weewx[4388]: reportengine: Running report RSYNC
Jan 19 13:55:58 weewx weewx[4388]: reportengine: Found configuration file
/etc/weewx/skins/Rsync/skin.conf for report RSYNC
Jan 19 13:55:58 weewx weewx[4388]: rsyncgenerator: rsync upload not
requested. Skipped.
Jan 19 14:00:15 weewx weewx[4388]: vantage: Getting archive packets since
2000-01-23 12:50:00 EST (948649800)
Jan 19 14:00:15 weewx rsyslogd-2007: action 'action 17' suspended, next
retry is Sat Jan 19 14:01:45 2019 [try http://www.rsyslog.com/e/2007 ]
Jan 19 14:00:20 weewx weewx[4388]: vantage: Retry #0 failed
Jan 19 14:00:20 weewx weewx[4388]: vantage: Rude wake up of console
successful
Jan 19 14:00:21 weewx weewx[4388]: vantage: Retrieving 246 page(s);
starting index= 3
Jan 19 14:00:21 weewx weewx[4388]: vantage: DMPAFT complete: page timestamp
******* N/A ******* ( N/A ) less than final timestamp 2000-01-23
12:50:00 EST (948649800)
Jan 19 14:00:21 weewx weewx[4388]: vantage: Catch up complete.
Jan 19 14:00:21 weewx weewx[4388]: vantage: Requesting 200 LOOP packets.
Jan 19 14:00:21 weewx weewx[4388]: reportengine: Running reports for latest
time in the database.
Jan 19 14:00:21 weewx weewx[4388]: reportengine: Running report
StandardReport
Jan 19 14:00:21 weewx weewx[4388]: vantage: Gentle wake up of console
successful
Jan 19 14:00:21 weewx weewx[4388]: reportengine: Found configuration file
/etc/weewx/skins/Standard/skin.conf for report StandardReport
Jan 19 14:00:22 weewx weewx[4388]: cheetahgenerator: using search list
['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station',
'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats',
'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras']
Jan 19 14:00:22 weewx weewx[4388]: manager: Daily summary version is 2.0
Jan 19 14:00:32 weewx weewx[4388]: cheetahgenerator: Generated 14 files for
report StandardReport in 10.06 seconds
Jan 19 14:00:32 weewx weewx[4388]: manager: Daily summary version is 2.0
Jan 19 14:00:37 weewx weewx[4388]: imagegenerator: Generated 12 images for
StandardReport in 5.46 seconds
Jan 19 14:00:37 weewx weewx[4388]: copygenerator: copied 0 files to
/var/www/html/weewx
Jan 19 14:00:37 weewx weewx[4388]: reportengine: Running report FTP
Jan 19 14:00:37 weewx weewx[4388]: reportengine: Found configuration file
/etc/weewx/skins/Ftp/skin.conf for report FTP
Jan 19 14:00:37 weewx weewx[4388]: ftpgenerator: FTP upload not requested.
Skipped.
Jan 19 14:00:37 weewx weewx[4388]: reportengine: Running report RSYNC
Jan 19 14:00:37 weewx weewx[4388]: reportengine: Found configuration file
/etc/weewx/skins/Rsync/skin.conf for report RSYNC
Jan 19 14:00:37 weewx weewx[4388]: rsyncgenerator: rsync upload not
requested. Skipped.
======== log end ========
======== weewx.conf begin ========
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.8.2
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Burning Tree Estates, Bethesda, Maryland, USA"
# Latitude and longitude in decimal degrees
latitude = 39.0036
longitude = -77.1585
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 250, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = Vantage
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is
required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The id of your ISS station (usually 1). If you use a wind meter
connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
[[Twitter]]
oauth_token_secret = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
oauth_token = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
app_key_secret = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
app_key = aaaaaaaaaaaaaaaaaaaaaaaaa
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and
other
# customizations. Many of those changes can be made here by
overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standard
[[[Units]]]
[[[[Groups]]]]
group_altitude = foot
group_speed2 = mile_per_hour2
group_pressure = inHg
group_rain = inch
group_rainrate = inch_per_hour
group_temperature = degree_F
group_degree_day = degree_F_day
group_speed = mile_per_hour
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four
lines.
# Use quotes around passwords to guard against parsing errors.
#user = replace with the ftp username
#password = replace with the ftp password
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The server, user, and path determine where files will be sent.
# The server is the server name, such as www.threefools.org
# The user is the username, such as weewx
# The path is the destination directory, such as
/var/www/html/weather
# Be sure that the user has write permissions on the destination!
#server = replace_me
#user = replace_me
#path = replace_me
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible
values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name (quotes guard against parsing
errors)
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS,
user.twitter.Twitter
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
======== weewx.conf begin ========
On Tuesday, January 15, 2019 at 10:57:16 PM UTC-5, gjr80 wrote:
>
> Hi,
>
> Would help to see a debug log extract. To do this edit weewx.conf, set debug
> = 1, save weewx.conf and restart weeWX. Wait for at least a couple of
> archive periods to pass and then post a log extract from when you restarted
> weeWX through until the couple of archive periods have passed. Would also
> help to see weewx.conf, just make sure you remove any user names,
> passwords, API keys, twitter account details or other sensitive info before
> posting.
>
> Gary
>
> On Wednesday, 16 January 2019 10:24:35 UTC+10, Charles Robb Hill wrote:
>>
>> Hi,
>>
>> Hoping someone can help with my weewx twitter config....
>>
>> Long time user of weewx with no issues. Today went to setup the twitter
>> feed. Extension installed & got all my keys secrets and tokens configured
>> in weewx.conf
>>
>> Restart Weewx. It loads the extension but never posts to twitter.
>>
>> Any suggestions to start troubleshooting this?
>>
>> Thanks,
>> Robb
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
