Doing a little searching the WS-1041 might be a Fine Offset clone. On Thursday, January 31, 2019 at 10:01:44 AM UTC-5, rich T wrote: > > “Hi, console is not connected t raspberry, but receive data correctly of > cource.” You are saying the console is receiving data from the external > sensor. > > There are a couple possibility on how to proceed before giving up on this > project. > > 1. SDR Approach > > a. If you want to use the SDR, you should install software such as > “Gqrx” on the RPi to see if the SDR is actually receiving the 433.7 MHz > signal (*https://fccid.io/2ANQU-WS1040* <https://fccid.io/2ANQU-WS1040>) > from the external sensor. If you cannot see the signal, try moving the > RPi to different locations. > > > > b. If you can see the 433.7 MHz signal from the external sensor, refer > to *https://github.com/merbanan/rtl_433* > <https://github.com/merbanan/rtl_433> on how to record / analyze / > provide a sample of the signal. > > > > 2. USB Approach > > a. Need to figure out if the WS-1041 is a clone of another 433 MHz > Weather Station. > > > > b. If it is a clone, connect the Console to the RPi by way of the USB > connection and use that driver if available. > *http://www.weewx.com/docs/hardware.htm* > <http://www.weewx.com/docs/hardware.htm> > > > > https://fccid.io/2ANQU-WS1040/Users-Manual/Users-manual-3684727 > > > On Thursday, January 31, 2019 at 3:17:16 AM UTC-5, Wifi75 wrote: >> >> my system is this: >> >> https://it.aliexpress.com/item/rf-433mhz-wireless-solar-weather-station-PC-clock-radio-controlled-WS1041/32480036686.html >> >> I think it is 433 mhz, but after the scan finds only another internal >> receiver, I recognize it from the temperature. >> >> if you tell me that ws1041 is not compatible, abandon the project. >> >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
