Try running rtl_433 from the command line: rtl_433 -q -M utc -F json -p 39.741 -G -f 914980000
Check all of the packets received. I ran into an issue where the SDR was reading WH24 instead of WH65B, I had to move my antenna around a bit to get it to read the WH65B and it has not been and issue since. I am assuming you are still receiving data to the console, so you know the sensor array is transmitting? On Wednesday, February 13, 2019 at 7:25:44 AM UTC-6, G Hammer wrote: > > It seems that data collection is not my sweet spot. > Yesterday, WH65B data stopped being recorded. > Nothing, and I mean nothing, had changed. > The WH25B still was being seen/recorded so I know the SDR portion is fine. > Perhaps low battery or some other failure with the outdoor sensor? > No, since it uses the console to report to WU and Ambient Weather a quick > check of those show live data flowing with no gaps. > Set debug = 1 and restart weewx. Nothing interesting. > Run weewx directly, no WH65B data is seen. > Run rtl_433 directly no WH65B data is seen. > > Moved the USB and antenna closer to the outdoor sensor, no WH65B data is > seen. > > Move weewx back to the Interceptor, normal data is seen again. > > Since the console sees the WH65B and the SDR sees the WH25B on the same > frequency, anyone have an idea? I'm at a loss. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
