Once I change the serial number on any of dongles and after running it 24 hrs, I run Kalibrate to find out the ppm offset.
On Wednesday, February 27, 2019 at 7:10:05 PM UTC-5, [email protected] wrote: > > Thanks to everybody for their various and valid suggestions. > > After careful consideration I opted for rich T's suggestion to use > rtl_eeprom to give unique serial numbers. Very simple solution and I now > have two permanently unique SDR dongles working perfectly with the -d > option to select serial number. > > Thanks again, > Ian > > > > On Tuesday, February 26, 2019 at 2:36:16 PM UTC, rich T wrote: >> >> Did you try "rtl_eeprom" to change the dongle's serial number. >> >> On Monday, February 25, 2019 at 6:40:42 PM UTC-5, [email protected] >> wrote: >>> >>> Thanks Ruben, >>> >>> I will give a try and let you know how it goes. >>> >>> On Monday, February 25, 2019 at 9:43:24 PM UTC, Ruben Navarro Huedo >>> wrote: >>>> >>>> have a look at this. >>>> >>>> https://www.rtl-sdr.com/forum/viewtopic.php?t=2073 >>>> >>>> You need set a seral in each rtlsdr. >>>> After you must use that serial with rtl_433 >>>> >>>> El lunes, 25 de febrero de 2019, 18:59:15 (UTC+1), [email protected] >>>> escribió: >>>>> >>>>> I am using two identical SDR usb dongles to receive streams from two >>>>> different frequencies, namely 433Mhz and 868Mhz. >>>>> >>>>> I have set up WeeWX to run two weather stations as per >>>>> https://github.com/weewx/weewx/wiki/weewx-multi and all is running OK. >>>>> >>>>> The problem I have is to how to allocate one dongle to each of the two >>>>> configurations. >>>>> >>>>> lsusb lists them as: - >>>>> >>>>> Bus 001 Device 002: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 >>>>> DVB-T >>>>> Bus 001 Device 003: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 >>>>> DVB-T >>>>> >>>>> Thank you in advance for any guidance. >>>>> >>>>> Ian >>>>> >>>>> >>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
