Thank you for your answer again. I will have to get used to weewx to full
understand what I need to do. Right now, my weewx.conf uses the patches
from the AS3935 configuration and should generate (right?) a new
lightning.sdb database. The sensor_map contains:
[WeatherFlowUDP]
driver = user.weatherflowudp
log_raw_packets = False
udp_address = <broadcast>
# udp_address = 0.0.0.0
# udp_address = 255.255.255.255
udp_port = 50222
udp_timeout = 90
share_socket = True
[[sensor_map]]
outTemp = air_temperature.AR-00004197.obs_air
outHumidity = relative_humidity.AR-00004197.obs_air
pressure = station_pressure.AR-00004197.obs_air
outTempBatteryStatus = battery.AR-00004197.obs_air
windSpeed = wind_speed.SK-00006737.rapid_wind
windDir = wind_direction.SK-00006737.rapid_wind
lux = illuminance.SK-00006737.obs_sky
UV = uv.SK-00006737.obs_sky
rain = rain_accumulated.SK-00006737.obs_sky
windBatteryStatus = battery.SK-00006737.obs_sky
radiation = solar_radiation.SK-00006737.obs_sky
#soilMoist1 = lightning_strike_count.AR-00004197.obs_air
#soilMoist1 = lightning_strike_count.AR-00004197.obs_air
lightning_strikes = lightning_strike_count.AR-00004197.obs_air
avg_distance = lightning_strike_avg_distance.AR-00004197.obs_air
lightningYYY = distance.AR-00004197.evt_strike
lightningZZZ = energy.AR-00004197.evt_strike
I'll go and read documentation about how to generate plots. Would you know
what is the format of lightning log? Is it counts/minute or?
Thank you.
Dne sreda, 13. marec 2019 22.02.46 UTC+1 je oseba vince napisala:
>
> On Wednesday, March 13, 2019 at 1:34:38 PM UTC-7, [email protected] wrote:
>
>> I've installed the WF UDP driver and am getting data into weewx OK. For
>> the start, I have 3 questions:
>>
>> 1. My plots (temperature, humidity, barometer, etc.) do not show any
>> labels nor axis labels. I've installed the Robo fonts which are neowx
>> default. Same thing was with a Seasons skin.
>> 2. How to properly log the lightning data (counts, timestamps,
>> distance) from the WeatherFlow station? I'm confused whether the data
>> should be logged into existing 'weewx.sdb' database or a new one. I also
>> don't know how to set up a new database and how to plot the lightning
>> data.
>> 3. How can I plot the solar radiation (as an example)? I only see the
>> UV plot by default.
>>
>>
> Asked and answered already on the WF forums the other day.
>
> - My suggestion over there was that you just reuse unused elements in
> the default schema (to simplify your task), and I provided the weewx.conf
> block for the WF UDP driver that would do that. You'd just need to edit
> the lines into your weewx.conf and restart weewx to have them take effect.
> - Which WF sensor-reported element gets mapped to which db element is
> based on your weewx.conf
> - As I mentioned over there, I chose to (lightly) edit my Seasons skin
> templates to add the WF-specific stuff to the output html. ((LINK)
>
> <https://www.google.com/url?q=https%3A%2F%2Fwww.skahan.net%2Fweewx_weatherflow%2F&sa=D&sntz=1&usg=AFQjCNFAjxL8d7hXCRF8AEpVlC3F2EDDag>
>
> - If that display works for you, let me know and I'll post a patch for
> what
> minor edits I made in the default Seasons skin that makes it happen.
>
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
