making progress -
ok, I must not be doing something right, all the data in the log says
"parse text failed"
Not sure whats wrong with my entries. I didnt adjust all of them as I wasnt
sure if they were correct, but obviously i dont think any of them are :
[SDR]
# This section is for the software-defined radio driver.
# The driver to use
driver = user.sdr
cmd= "sudo rtl_433 -f 914880000"
[[sensor_map]]
outTemp = temperature.3.FOWH65BPacket
outHumidity = Humidity.10.FOWH65BPacket
extraTemp1 = temperature.75.FOWH2Packet
windDir = Wind Direction.10.FOWH65BPacket
windSpeed = Wind Speedd.10.FOWH65BPacket
windGust = wind_gust.3.FOWH65BPacket
rain = rain_total.3.FOWH65BPacket
UV = UV.232.FOWH65BPacket
radiation = Light.10.FOWH65BPacket
outTempBatteryStatus = Battery.10.FOWH65BPacket
log output
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: lines=['_ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ \n', '\n', 'time : 2019-03-17
17:06:46\n', 'model : Fine Offset WH65B\n', 'ID : 10\n',
'Temperature: 7.0 C\n', 'Humidity : 27 %\n', 'Wind direction: 304\n',
'Wind speed: 1.2 m/s\n', 'Gust speed: 1.5 m/s\n', 'Rainfall : 295.1 mm\n',
'UV : 456\n', 'UVI : 1\n', 'Light : 23126.0 lux\n',
'Battery : OK\n', 'Integrity : CRC\n', '_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ \n', '\n', 'time : 2019-03-17 17:06:48\n', 'model :
AmbientWeather-WH31E\n', 'id : 211\n', 'Channel : 1\n', 'Battery
: OK\n', 'Temperature: 12.8 C\n', 'Humidity : 19 %\n', 'Extra Data:
be00000000\n', 'Integrity : CRC\n', '_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_\n', 'time : 2019-03-17 17:06:48\n', 'model :
AmbientWeather-WH31E id : 211\n', 'Channel : 1
Battery : OK Temperature: 12.8 C Humidity :
19 %\n', 'Extra Data: be00000000 Integrity : CRC\n']
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=1552842406 payload= line=time : 2019-03-17 17:06:46
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=model : Fine Offset WH65B
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=ID : 10
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Temperature: 7.0 C
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Humidity : 27 %
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Wind direction: 304
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Wind speed: 1.2 m/s
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Gust speed: 1.5 m/s
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Rainfall : 295.1 mm
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=UV : 456
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=UVI : 1
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Light : 23126.0 lux
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Battery : OK
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Integrity : CRC
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Mar 17 17:06:51 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=1552842408 payload= line=time : 2019-03-17 17:06:48
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=model : AmbientWeather-WH31E
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=id : 211
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Channel : 1
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Battery : OK
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Temperature: 12.8 C
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Humidity : 19 %
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Extra Data: be00000000
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=Integrity : CRC
Mar 17 17:06:52 raspberrypi sdr[16329]: sdr: MainThread: parse_text failed:
ts=None payload=None line=_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
On Sunday, March 17, 2019 at 4:38:27 PM UTC-4, [email protected] wrote:
>
> I'm glad that helps. As far as adding things to weewx goes, I've stumbled
> through that for inside humidity but that's about the extent of it.
> Hopefully, someone with more experience will chime in. I'm sure it can be
> done. Weewx is very flexible.
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
