I just picked up the WTH1000 - ill either add it as an extra channel or replace one of my 8 with it.
On Fri, Mar 22, 2019 at 6:20 AM 'Tolip Wen' via weewx-user < [email protected]> wrote: > You can use a BMP 180 or a BMP 280 on the Pi for temp and pressure with 4 > wires total. a few tutorials out there. I got mine from Adafruit. > > On Tuesday, March 19, 2019 at 10:27:16 AM UTC-5, Bruce Butkus wrote: > >> Hey All, >> Ive got 3 weather stations reporting, a WS2902, and 2x WS2065, with both >> report the same 8x WH31 units, plus their own temps. >> >> My end goal is to run a Pi with its own display to push a webpage/ >> interface that displays the current readings, along with data backup for >> power / internet outages. >> >> Got my Pi, and SDR as this is where i learned about the Weewx, and data >> backup. >> >> Im trying to set up the RTL-SDR + RTL_433 to pick up the radio signals of >> the outdoor array + the 8 indoor units as a backup for internet or power >> outages. As such I realized that the WS2902 does NOT report barometric >> pressure over radio. this probably isnt a big deal unless the power / >> service is out for a long time, its not a rapidly changing as say wind or >> rain. and I could pick up a WH32B t/h/b sensor and replace or add it to the >> array so i can get everything. >> >> But I thought, to be complete, if I used the other driver 'interceptor' >> to pull the data from the network, well that opens up the other 2 devices >> 'indoor' temps as well, and i could pick up everything, without running >> the SDR.. >> >> the question is, does that seem reasonable. the console for the 2902 >> would then need to be on battery backup as well, not really an issue, as >> the wifi already is on battery. but if the wifi goes down I get no data, >> where as with the SDR, I could still get the radio signals from the devices >> running on battery. Plus i already have the SDR and its half configured for >> weewx already, just finishing up the sensor mapping. >> Im running the various consoles on wifi and connected to one wifi router, >> the same my pi is connected to wifi on. I would also still like be pushing >> data to ambientweather.net and wunderground obviously. >> >> kinda just looking for advice. I think the easiest thing is finish up the >> SDR, and add a WH32b at some point to do barometric readings and be done. >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/RROZvmQ7Sic/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
