Yeah I’ve tried power cycling the bridge many times (even unplugging for extended periods of time between power cycles) but unfortunately it just won’t get out of the attempting to download firmware step. The only packets the bridge sends out do go to the Pi via the dns entry for hubapi.myacurite.com but it only contains the post to /messages/ regarding firmware. I can see the proper responses when browsing to hubapi.myacurite.com so I don't doubt that the interceptor is doing it's job. It's sad that my bridge appears to be bricked but I don't have a way to flash firmware nor have I figured out a way to get it out of this state. Thanks for taking the time to review, let me know if you have any other ideas, but if not I still really appreciate the assistance.
On Mon, Apr 8, 2019 at 4:30 PM mwall <[email protected]> wrote: > > > On Saturday, April 6, 2019 at 9:24:20 PM UTC-4, Jamie Borget wrote: >> >> However I just tried browsing to my acurite smart hub (which I didn't >> know you could do) and this is the status shown with attached screenshot. >> Please let me know if you've seen this before or if you know if it's >> recoverable. >> > > that is the status page for the 224 firmware when it is trying to download > firmware. if you power cycle the bridge it should go back to a normal > state. > > 1) set the interceptor to firmware_version=224 (or just don't set it - it > defaults to 224) > > 2) ensure that the interceptor is responding by putting these urls in a > web browser: > > http://hubapi.myacurite.com > http://www.acu-link.com > > i am pretty sure that you only need the myacurite mapping for firmware 224 > and acu-link mapping for firmware 126, but do them both to be safe > > 3) remove power from the acurite bridge > > 4) power on the acurite bridge > > 5) in a web browser enter http://x.x.x.x where x.x.x.x is the url of the > acurite bridge > > i have updated the wiki page based on this thread: > > https://github.com/weewx/weewx/wiki/acuritebridge > > > > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/0e2E3F7EG7Y/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
