I have had this before with Fine Offset pressure sensors. What I did was use the nearest airfield or known pressure value and calibrate the sensore using weewx.conf to adjust the pressure value eg pressure = pressure + 0.8 to increase the reading by 0.8 inHg
Alternatively, if you believe the pressure value is correct, adjust the limits in weewx.conf Your problem is definitely being caused by the pressure values supplied by the station are outside the limits specified in weewx.conf so you need to either change the pressure value or the limit (or maybe even both). the values for barometer and altimeter will be calculated by weewx, so should be specified as 'software preferred' in weewx.conf On Saturday, 11 May 2019 04:40:43 UTC+3, Greg from Oz wrote: > > Here is my web page: > https://weather.ubeaut.work/ > > > On Saturday, 11 May 2019 02:38:20 UTC+10, jose riaño wrote: >> >> Instale weewx de paso te digo que es una herramienta fantástica lo que >> me sucede es que no me guarda los datos de presión de la estación y tampoco >> me los envía ala plataforma de la wunderground. >> >> >> [image: Captura de pantalla 2019-05-10 a la(s) 11.31.45 a.m..png] >> este es el ultimo dato de la base de datos. >> >> [image: Captura de pantalla 2019-05-10 a la(s) 11.32.47 a.m..png] >> y esta es la base de la estación, quisiera que me ayudes ella mide >> presíon absoluta y relativa es una estacion de tipo 3080. >> >> [image: base.jpg] >> >> >> >> >> [image: Captura de pantalla 2019-05-10 a la(s) 11.37.42 a.m..png] >> >> >> >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8e7e855b-8864-4168-8e50-6da56d32c3e0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
