you have web server running on port 80 this will help https://github.com/matthewwall/weewx-interceptor
On Sunday, June 2, 2019 at 4:03:37 PM UTC-5, Thomas Chapin wrote: > > Hoping someone smarter than I can help... > > Like others, I was fried when after 3 months told by Acurite that they > were discontinuing smartHub and I could pay another $129 for its > replacement...I read about Weewx and Rasberry Pi. > > Finally bought the Pi and got started. Quickly underestimated the > networking knowledge I would need. > > Basically, I need help connecting Weewx to the data coming from the > smartHub. I think it's mostly a DNS networking and interceptor driver > config challenge. > > Here's my current state, let me know if any other info (e.g. weewx config) > is needed. > > ******************************************888 > > Rasberry Pi 3 B+ running Debian > Wireless connection to Internet through Google Wifi (see below) > Nothing plugged into ethernet jack on Pi (at this time) > SSH - enabled > I2C - enabled for RTC below > RTC (SunFounder PCF8563 IIC I2C Real Time Clock RTC) installed and > functioning > > ******************************************* > Network Settings: > Google Wifi Mesh Router > DNS set to automatic 8.8.8.8 (Google) > On Google wifi, have configured DHCP reservations for both the SmartHub > and Pi IP numbers (below) > SmartHub ethernet plugged into one of the wifi pucks, IP: 192.168.xx > Rasberry Pi IP:: 192.168.yy > > **************** > Acurite smartHub - v224 (boot firmware v210) - server targeted - > hubapi.myacurite.com - can see it at its IP number > > ********************* > Weewx > Have downloaded and installed Weewx > Have downloaded and configured Interceptor Driver > Have configured Weewx for interceptor driver, device acurite > Have downloaded and installed apache - web server running on port 80: > Apache/2.4.25 (Raspbian) Server at 192.168.86.yy Port 80 > > pi@raspberrypi:~ $ sudo tail -f /var/log/syslog > Jun 2 16:18:53 raspberrypi systemd[1]: Started LSB: weewx weather system. > Jun 2 16:18:53 raspberrypi weewx[25630]: engine: Loading station type > Interceptor (user.interceptor) > Jun 2 16:18:53 raspberrypi weewx[25630]: interceptor: MainThread: driver > version is 0.45 > Jun 2 16:18:53 raspberrypi weewx[25630]: interceptor: MainThread: device > type: acurite-bridge > Jun 2 16:18:53 raspberrypi weewx[25630]: interceptor: MainThread: sensor > map: None > Jun 2 16:18:53 raspberrypi weewx[25630]: interceptor: MainThread: mode is > listen > Jun 2 16:18:53 raspberrypi weewx[25630]: interceptor: MainThread: listen > on :80 > Jun 2 16:18:53 raspberrypi weewx[25630]: import of driver failed: [Errno > 98] Address already in use (<class 'socket.error'>) > Jun 2 16:18:53 raspberrypi weewx[25630]: engine: Unable to load driver: > [Errno 98] Address already in use > Jun 2 16:18:53 raspberrypi weewx[25630]: **** Exiting... > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b74bebbe-b708-4113-9b99-36d13c65f9f7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
