Keep running the simulator for a while, but can you now give us the log from startup for at least two archive intervals FOR SIMULATOR so that we can be SURE everything is working as it should be. Then, if that looks ok, can you stop weewx, set debug = 1, restart weewx and again attach the log from startup until at least two archive intervals. This should show that all is ok with debug also!!
On Friday, 14 June 2019 12:36:32 UTC+3, Damjan Hajsek wrote: > > https://github.com/matthewwall/weewx-interceptor > > this is what I have for interceptor in weewx.conf > > [Interceptor] > # This section is for the network traffic interceptor driver. > > # The driver to use: > driver = user.interceptor > > # Specify the hardware device to capture. Options include: > # acurite-bridge - acurite internet bridge, smarthub, or access > # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902 > # lw30x - oregon scientific LW301/LW302 > # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge > # wu-client - any hardware that uses the weather underground protocol > #device_type = acurite-bridge > device_type = observer > port = 990 > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/d749384f-acce-49df-b194-addea2609f94%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
