Weewx is trying to kill me! Due to a multitude of issues on my original
installation, I did a complete new installation of OS and WeeWX on
Raspberry Pi. The installation initially worked, but after a reboot this
afternoon, WeeWX is no longer running reports. I'm using the Seasons skin
with FileParse driver.
I have an archive interval of 5 mins. set. When I start WeeWX manually, I
can see the loop packets coming through, but the seem to have an incorrect
time stamp. The data being uploaded includes a date and time field
populated with Unix time. When I convert those Unix times, I can see that
they are the correct time. The time on the Pi is correct. i've attached
the output of the startup and a sample of the LOOP data.
My weewx.conf:
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2019 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 2
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.9.1
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Sky Pirates Field, Plumsteadville, PA"
# Latitude and longitude in decimal degrees
latitude = 40.1625
longitude = 75.143
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 460, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = FileParse
# If you have a website, you may specify an URL
#station_url = http://www.example.com
station_url = localhost/weewx
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Simulator]
# This section is for the weewx weather station simulator
# The time (in seconds) between LOOP packets.
loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
#mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for
testing).
mode = generator
# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default
# is to use the present time.
#start = 2011-01-01T00:00
# The driver to use:
#driver = /weewx-3.9.1/bin/user.fileparse
#############################################################################
[FileParse]
poll_interval = 10
path = /var/tmp/data.csv
driver = user.fileparse
loop_interval = 10
[[label_map]]
Time = dateTime
pressure = pressure
outTemp = outTemp
outHumidity = outHumidity
windSpeed = windSpeed
windDir = windDir
windGust = windGust
windGustDir = windGustDir
supplyVoltage = supplyVoltage
lightLevel = radiation
rainRate = rainRate
rain = rain
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Whether to log a successful operation
log_success = True
# Whether to log an unsuccessful operation
log_failure = False
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images
and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[SteelSeries]]
skin = ss
enable = false
HTML_ROOT = /var/www/html/weewx
[[Washboard]]
skin = Washboard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as
/var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
####
# Various options for customizing your reports.
[[Defaults]]
[[[Units]]]
# The following section sets what unit to use for each unit
group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = foot # Options are 'foot' or 'meter'
group_degree_day = degree_F_day # Options are
'degree_F_day' or 'degree_C_day'
group_pressure = inHg # Options are 'inHg', 'mmHg',
'mbar', or 'hPa'
group_rain = inch # Options are 'inch', 'cm', or 'mm'
group_rainrate = inch_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = mile_per_hour # Options are
'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = mile_per_hour2 # Options are
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_F # Options are 'degree_F' or
'degree_C'
# The following section sets the formatting for each type of
unit.
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"
# The following section sets the label for each type of unit
[[[[Labels]]]]
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""
# The following section sets the format for each time scale.
# The values below will work in every locale, but they may not
look
# particularly attractive.
[[[[TimeFormats]]]]
hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X
[[[[Ordinates]]]]
# Ordinal directions. The last one is for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW,
WSW, W, WNW, NW, NNW, N/A
# The following section sets the base temperatures used for
the
# calculation of heating and cooling degree-days.
[[[[[DegreeDays]]]]]
# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# A trend takes a difference across a time period. The
following
# section sets the time period, and how big an error is
allowed to
# still be counted as the start or end of a period.
[[[[[Trend]]]]]
time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes
# The labels to be used for each observation type
[[[Labels]]]
# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W
# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f
# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
inHumidity = Inside Humidity
inTemp = Inside Temperature
outHumidity = Humidity
outTemp = Outside Temperature
radiation = Radiation
rain = Rain Today
rainRate = Rain Last Hour
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
extraTemp1 = Temperature1
extraTemp2 = Temperature2
extraTemp3 = Temperature3
# Sensor status indicators
rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage
[[[Almanac]]]
# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing
gibbous, Full, Waning gibbous, Last quarter, Waning crescent
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = hardware
barometer = software
altimeter = software
windchill = software
heatindex = software
dewpoint = software
inDewpoint = software
rainRate = hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = False
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user =
# The password for the user name (quotes guard against parsing
errors)
password =
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/eb420b4a-6232-49d0-9969-1c4f236a6a73%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
pi@WeatherPi:/etc/weewx $ sudo weewxd weewx.conf
LOOP: 2019-07-03 13:24:59 EDT (1562174699) altimeter: 30.0166696914, appTemp:
85.5966193906, barometer: 30.0098250611, cloudbase: 460.0, dateTime:
1562174699.0, dewpoint: 75.4, heatindex: 75.4, humidex: 95.9057492658,
maxSolarRad: None, outHumidity: 100.0, outTemp: 75.4, pressure: 29.53,
radiation: 1.38, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.4, windDir: 315.0, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.7
LOOP: 2019-07-03 13:25:09 EDT (1562174709) altimeter: 30.0166696914, appTemp:
85.1460041906, barometer: 30.0098250611, cloudbase: 460.0, dateTime:
1562174709.0, dewpoint: 75.4, heatindex: 75.4, humidex: 95.9057492658,
maxSolarRad: None, outHumidity: 100.0, outTemp: 75.4, pressure: 29.53,
radiation: 1.41, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.4, windDir: 315.0, windGust: 1.5, windGustDir: 315.0, windSpeed:
1.5
LOOP: 2019-07-03 13:25:19 EDT (1562174719) altimeter: 30.0166696914, appTemp:
85.6995715571, barometer: 30.0097346783, cloudbase: 460.0, dateTime:
1562174719.0, dewpoint: 75.5, heatindex: 75.5, humidex: 96.1098123092,
maxSolarRad: None, outHumidity: 100.0, outTemp: 75.5, pressure: 29.53,
radiation: 1.59, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.5, windDir: 315.0, windGust: 1.5, windGustDir: 315.0, windSpeed:
0.8
LOOP: 2019-07-03 13:25:31 EDT (1562174731) altimeter: 30.0166696914, appTemp:
85.9909076906, barometer: 30.0098250611, cloudbase: 460.0, dateTime:
1562174731.0, dewpoint: 75.4, heatindex: 75.4, humidex: 95.9057492658,
maxSolarRad: None, outHumidity: 100.0, outTemp: 75.4, pressure: 29.53,
radiation: 1.36, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.4, windDir: None, windGust: 1.5, windGustDir: 315.0, windSpeed:
0.0
LOOP: 2019-07-03 13:25:41 EDT (1562174741) altimeter: 30.0166696914, appTemp:
85.5225015829, barometer: 30.0098250611, cloudbase: 466.833827051, dateTime:
1562174741.0, dewpoint: 75.369931161, heatindex: 75.4, humidex: 95.8745203697,
maxSolarRad: None, outHumidity: 99.9, outTemp: 75.4, pressure: 29.53,
radiation: 1.23, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.4, windDir: 270.0, windGust: 1.5, windGustDir: 315.0, windSpeed:
0.8
LOOP: 2019-07-03 13:25:51 EDT (1562174751) altimeter: 30.0166696914, appTemp:
85.8129986137, barometer: 30.0098250611, cloudbase: 528.608313722, dateTime:
1562174751.0, dewpoint: 75.0981234196, heatindex: 75.4, humidex: 95.5935151841,
maxSolarRad: None, outHumidity: 99.0, outTemp: 75.4, pressure: 29.53,
radiation: 1.69, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.18, usUnits: 1,
windchill: 75.4, windDir: None, windGust: 1.5, windGustDir: 315.0, windSpeed:
0.0
LOOP: 2019-07-03 13:26:01 EDT (1562174761) altimeter: 30.0166696914, appTemp:
85.2247305421, barometer: 30.009915478, cloudbase: 542.367535742, dateTime:
1562174761.0, dewpoint: 74.9375828427, heatindex: 75.3, humidex: 95.3286281133,
maxSolarRad: None, outHumidity: 98.8, outTemp: 75.3, pressure: 29.53,
radiation: 2.02, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.3, windDir: 0.0, windGust: 1.5, windGustDir: 315.0, windSpeed: 0.7
LOOP: 2019-07-03 13:26:11 EDT (1562174771) altimeter: 30.0166696914, appTemp:
85.400919406, barometer: 30.0098250611, cloudbase: 535.502359279, dateTime:
1562174771.0, dewpoint: 75.0677896192, heatindex: 75.4, humidex: 95.5622984959,
maxSolarRad: None, outHumidity: 98.9, outTemp: 75.4, pressure: 29.53,
radiation: 1.2, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.4, windDir: 338.0, windGust: 1.5, windGustDir: 315.0, windSpeed:
0.7
LOOP: 2019-07-03 13:26:21 EDT (1562174781) altimeter: 30.0166696914, appTemp:
85.8485804291, barometer: 30.0098250611, cloudbase: 514.838431059, dateTime:
1562174781.0, dewpoint: 75.1587109033, heatindex: 75.4, humidex: 95.6559522315,
maxSolarRad: None, outHumidity: 99.2, outTemp: 75.4, pressure: 29.53,
radiation: 1.13, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.4, windDir: None, windGust: 1.5, windGustDir: 315.0, windSpeed:
0.0
LOOP: 2019-07-03 13:26:31 EDT (1562174791) altimeter: 30.0166696914, appTemp:
85.0570496522, barometer: 30.0098250611, cloudbase: 494.228955773, dateTime:
1562174791.0, dewpoint: 75.2493925946, heatindex: 75.4, humidex: 95.7496169695,
maxSolarRad: None, outHumidity: 99.5, outTemp: 75.4, pressure: 29.53,
radiation: 1.24, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.4, windDir: 0.0, windGust: 1.5, windGustDir: 0.0, windSpeed: 1.5
LOOP: 2019-07-03 13:26:41 EDT (1562174801) altimeter: 30.0166696914, appTemp:
85.5610375752, barometer: 30.0098250611, cloudbase: 473.673624875, dateTime:
1562174801.0, dewpoint: 75.3398360506, heatindex: 75.4, humidex: 95.8432926914,
maxSolarRad: None, outHumidity: 99.8, outTemp: 75.4, pressure: 29.53,
radiation: 1.72, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.21, usUnits: 1,
windchill: 75.4, windDir: 0.0, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.7
LOOP: 2019-07-03 13:26:51 EDT (1562174811) altimeter: 30.0166696914, appTemp:
85.4513379522, barometer: 30.0098250611, cloudbase: 494.228955773, dateTime:
1562174811.0, dewpoint: 75.2493925946, heatindex: 75.4, humidex: 95.7496169695,
maxSolarRad: None, outHumidity: 99.5, outTemp: 75.4, pressure: 29.53,
radiation: 2.29, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.19, usUnits: 1,
windchill: 75.4, windDir: 315.0, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.8
LOOP: 2019-07-03 13:27:01 EDT (1562174821) altimeter: 30.0166696914, appTemp:
85.4513379522, barometer: 30.0098250611, cloudbase: 494.228955773, dateTime:
1562174821.0, dewpoint: 75.2493925946, heatindex: 75.4, humidex: 95.7496169695,
maxSolarRad: None, outHumidity: 99.5, outTemp: 75.4, pressure: 29.53,
radiation: 1.97, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.18, usUnits: 1,
windchill: 75.4, windDir: 315.0, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.8
LOOP: 2019-07-03 13:27:11 EDT (1562174831) altimeter: 30.0166696914, appTemp:
85.4898739445, barometer: 30.0098250611, cloudbase: 501.092749644, dateTime:
1562174831.0, dewpoint: 75.2191919016, heatindex: 75.4, humidex: 95.7183941688,
maxSolarRad: None, outHumidity: 99.4, outTemp: 75.4, pressure: 29.53,
radiation: 1.23, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.19, usUnits: 1,
windchill: 75.4, windDir: 315.0, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.7
LOOP: 2019-07-03 13:27:21 EDT (1562174841) altimeter: 30.0166696914, appTemp:
85.6666475233, barometer: 30.0097346783, cloudbase: 494.243481561, dateTime:
1562174841.0, dewpoint: 75.3493286811, heatindex: 75.5, humidex: 95.9531394805,
maxSolarRad: None, outHumidity: 99.5, outTemp: 75.5, pressure: 29.53,
radiation: 1.26, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.21, usUnits: 1,
windchill: 75.5, windDir: 315.0, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.7
LOOP: 2019-07-03 13:27:31 EDT (1562174851) altimeter: 30.0166696914, appTemp:
86.0609358233, barometer: 30.0097346783, cloudbase: 494.243481561, dateTime:
1562174851.0, dewpoint: 75.3493286811, heatindex: 75.5, humidex: 95.9531394805,
maxSolarRad: None, outHumidity: 99.5, outTemp: 75.5, pressure: 29.53,
radiation: 1.31, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.5, windDir: None, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.0
LOOP: 2019-07-03 13:27:41 EDT (1562174861) altimeter: 30.0166696914, appTemp:
86.3614464724, barometer: 30.0095540148, cloudbase: 501.145074818, dateTime:
1562174861.0, dewpoint: 75.5189616708, heatindex: 75.7, humidex: 96.3295800064,
maxSolarRad: None, outHumidity: 99.4, outTemp: 75.7, pressure: 29.53,
radiation: 1.36, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.22, usUnits: 1,
windchill: 75.7, windDir: None, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.0
LOOP: 2019-07-03 13:27:51 EDT (1562174871) altimeter: 30.0166696914, appTemp:
86.3255079483, barometer: 30.0095540148, cloudbase: 514.908254718, dateTime:
1562174871.0, dewpoint: 75.4584036792, heatindex: 75.7, humidex: 96.2664875856,
maxSolarRad: None, outHumidity: 99.2, outTemp: 75.7, pressure: 29.53,
radiation: 1.24, rain: 0.0, rainRate: 0.0, supplyVoltage: 4.19, usUnits: 1,
windchill: 75.7, windDir: None, windGust: 1.5, windGustDir: 0.0, windSpeed: 0.0
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Initializing weewx version 3.9.1
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Using Python 2.7.16 (default,
Apr 6 2019, 01:42:57) #012[GCC 8.2.0]
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Platform
Linux-4.19.50-v7+-armv7l-with-debian-10.0
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Locale is 'en_US.UTF-8'
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Using configuration file
/etc/weewx/weewx.conf
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Debug is 2
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Initializing engine
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading station type FileParse
(user.fileparse)
Jul 3 17:23:13 WeatherPi weewx[1612]: fileparse: data file is /var/tmp/data.csv
Jul 3 17:23:13 WeatherPi weewx[1612]: fileparse: polling interval is 10.0
Jul 3 17:23:13 WeatherPi weewx[1612]: fileparse: label map is {'Time':
'dateTime', 'pressure': 'pressure', 'outTemp': 'outTemp', 'outHumidity':
'outHumidity', 'windSpeed': 'windSpeed', 'windDir': 'windDir', 'windGust':
'windGust', 'windGustDir': 'windGustDir', 'supplyVoltage': 'supplyVoltage',
'lightLevel': 'radiation', 'rainRate': 'rainRate', 'rain': 'rain'}
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.engine.StdTimeSynch
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.engine.StdTimeSynch
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.engine.StdConvert
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: StdConvert target unit is 0x1
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.engine.StdConvert
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.engine.StdCalibrate
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.engine.StdCalibrate
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.engine.StdQC
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.engine.StdQC
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.wxservices.StdWXCalculate
Jul 3 17:23:13 WeatherPi weewx[1612]: wxcalculate: The following values will
be calculated: barometer=software, windchill=software, dewpoint=software,
appTemp=prefer_hardware, rainRate=hardware, windrun=prefer_hardware,
heatindex=software, maxSolarRad=prefer_hardware, humidex=prefer_hardware,
pressure=hardware, inDewpoint=software, ET=prefer_hardware, altimeter=software,
cloudbase=prefer_hardware
Jul 3 17:23:13 WeatherPi weewx[1612]: wxcalculate: The following algorithms
will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.wxservices.StdWXCalculate
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.engine.StdArchive
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Archive will use data binding
wx_binding
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Record generation will be
attempted in 'hardware'
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Using archive interval of 300
seconds (specified in weewx configuration)
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Use LOOP data in hi/low
calculations: 0
Jul 3 17:23:13 WeatherPi weewx[1612]: manager: Daily summary version is 2.0
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Using binding 'wx_binding' to
database 'weewx.sdb'
Jul 3 17:23:13 WeatherPi weewx[1612]: manager: Starting backfill of daily
summaries
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.engine.StdArchive
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.restx.StdStationRegistry
Jul 3 17:23:13 WeatherPi weewx[1612]: restx: StationRegistry: Registration not
requested.
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.restx.StdStationRegistry
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.restx.StdWunderground
Jul 3 17:23:13 WeatherPi weewx[1612]: restx: Wunderground: Posting not enabled.
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.restx.StdWunderground
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.restx.StdPWSweather
Jul 3 17:23:13 WeatherPi weewx[1612]: restx: PWSweather: Posting not enabled.
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.restx.StdPWSweather
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.restx.StdCWOP
Jul 3 17:23:13 WeatherPi weewx[1612]: restx: CWOP: Posting not enabled.
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.restx.StdCWOP
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.restx.StdWOW
Jul 3 17:23:13 WeatherPi weewx[1612]: restx: WOW: Posting not enabled.
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.restx.StdWOW
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.restx.StdAWEKAS
Jul 3 17:23:13 WeatherPi weewx[1612]: restx: AWEKAS: Posting not enabled.
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.restx.StdAWEKAS
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.engine.StdPrint
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.engine.StdPrint
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Loading service
weewx.engine.StdReport
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Finished loading service
weewx.engine.StdReport
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Starting up weewx version 3.9.1
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Station does not support reading
the time
Jul 3 17:23:13 WeatherPi weewx[1612]: engine: Starting main packet loop.
ul 3 17:26:55 WeatherPi systemd[1]: Starting Cleanup of Temporary
Directories...
Jul 3 17:26:55 WeatherPi systemd[1]: systemd-tmpfiles-clean.service: Succeeded.
Jul 3 17:26:55 WeatherPi systemd[1]: Started Cleanup of Temporary Directories.
Jul 3 17:27:06 WeatherPi kernel: [ 939.124878] rpi_firmware_get_throttled: 11
callbacks suppressed
Jul 3 17:27:06 WeatherPi kernel: [ 939.124888] Under-voltage detected!
(0x00050005)
Jul 3 17:27:25 WeatherPi kernel: [ 957.845152] Under-voltage detected!
(0x00050005)
Jul 3 17:27:31 WeatherPi kernel: [ 964.085049] rpi_firmware_get_throttled: 12
callbacks suppressed
Jul 3 17:27:31 WeatherPi kernel: [ 964.085056] Voltage normalised (0x00000000)
Jul 3 17:27:33 WeatherPi kernel: [ 966.165177] Under-voltage detected!
(0x00050005)
Jul 3 17:27:40 WeatherPi kernel: [ 972.405220] Voltage normalised (0x00000000)
Jul 3 17:27:52 WeatherPi kernel: [ 984.885364] Voltage normalised (0x00000000)
Jul 3 17:32:16 WeatherPi kernel: [ 1249.046983] rpi_firmware_get_throttled: 12
callbacks suppressed
Jul 3 17:32:16 WeatherPi kernel: [ 1249.046991] Under-voltage detected!
(0x00050005)
Jul 3 17:32:45 WeatherPi kernel: [ 1278.167074] rpi_firmware_get_throttled: 11
callbacks suppressed
Jul 3 17:32:45 WeatherPi kernel: [ 1278.167083] Voltage normalised (0x00000000)
Jul 3 17:32:47 WeatherPi kernel: [ 1280.246815] Under-voltage detected!
(0x00050005)
Jul 3 17:33:17 WeatherPi ntpd[493]: 103.105.51.156 local addr 192.168.125.51
-> <null>
Jul 3 17:33:25 WeatherPi kernel: [ 1317.686756] Voltage normalised (0x00000000)
Jul 3 17:33:29 WeatherPi kernel: [ 1321.846797] Under-voltage detected!
(0x00050005)
Jul 3 17:34:24 WeatherPi ntpd[493]: 65.182.224.39 local addr 192.168.125.51 ->
<null>
Jul 3 17:34:25 WeatherPi ntpd[493]: 64.6.144.6 local addr 192.168.125.51 ->
<null>
Jul 3 17:34:31 WeatherPi kernel: [ 1384.246846] Voltage normalised (0x00000000)
Jul 3 17:37:55 WeatherPi kernel: [ 1588.088188] rpi_firmware_get_throttled: 2
callbacks suppressed
Jul 3 17:37:55 WeatherPi kernel: [ 1588.088197] Voltage normalised (0x00000000)
Jul 3 17:37:57 WeatherPi kernel: [ 1590.168108] rpi_firmware_get_throttled: 3
callbacks suppressed
Jul 3 17:37:57 WeatherPi kernel: [ 1590.168117] Under-voltage detected!
(0x00050005)
Jul 3 17:38:24 WeatherPi kernel: [ 1617.208312] Voltage normalised (0x00000000)
Jul 3 17:38:35 WeatherPi kernel: [ 1627.608449] Under-voltage detected!
(0x00050005)
Jul 3 17:38:39 WeatherPi kernel: [ 1631.768469] Voltage normalised (0x00000000)
Jul 3 17:38:41 WeatherPi kernel: [ 1633.848482] Under-voltage detected!
(0x00050005)
Jul 3 17:39:57 WeatherPi ntpd[493]: 204.2.134.162 local addr 192.168.125.51 ->
<null>
Jul 3 17:43:49 WeatherPi kernel: [ 1941.688761] rpi_firmware_get_throttled: 12
callbacks suppressed
Jul 3 17:43:49 WeatherPi kernel: [ 1941.688770] Voltage normalised (0x00000000)
Jul 3 17:43:51 WeatherPi kernel: [ 1943.768755] rpi_firmware_get_throttled: 12
callbacks suppressed
Jul 3 17:43:51 WeatherPi kernel: [ 1943.768762] Under-voltage detected!
(0x00050005)
Jul 3 17:44:02 WeatherPi ntpd[493]: 204.11.201.10 local addr 192.168.125.51 ->
<null>
