Dear Andrew, This does seem helpful. Ron has just directed toward the source. Also Mr. Thomas has pointed out that WeeWX has it's own example Fileparse driver. I will explore both. Thank you. :-)
Regards, C. Ameya Manas On Thursday, July 4, 2019 at 7:39:29 AM UTC+5:30, Andrew Milner wrote: > > I see from Ron Walker's,weewx.conf in the thread "weewx not running > reports" that he has a driver called FileParse, and a FileParse section to > define the file contents. If you contact Ron and obtain the driver then > you should be able to select FileParse driver instead of Simulator and your > problem is solved. > > So contact Ron and see if he can help. I do not know if the driver is his > creation or if he obtained it elsewhere. > > > > On Wednesday, 3 July 2019 18:04:37 UTC+3, Thomas Keffer wrote: >> >> On Wed, Jul 3, 2019 at 7:39 AM p q <[email protected]> wrote: >> >>> Write yourself a little weewx service to read your csv file and put the >>> valid data in the right variables. Weewx will take care of the rest. >>> >> >> Unfortunately, this would not work. The program weewxd requires a device >> driver to run properly. So, Ameya would still be stuck with the simulator. >> >> The best solution is to write a device driver that reads from a file. I >> don't see one on the Wiki, but someone has probably written one. It's not >> very hard. >> >> -tk >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/29f99275-18fc-4127-957e-ef24e1201551%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
