Thank you for the assistance Andrew, after calibration the pressure sensor it works like a charm ( I had skimmed over that table in the wiki and missed the proper settings for the sensors) , but still I wasn't able to figure out where the problem with the missing wind direction data comes from.
On Monday, 8 July 2019 11:15:54 UTC+3, Andrew Milner wrote: > > To see what weewx is receiving from the station stop weewx and run it > directly and not as a daemon. The LOOP and REC packets should then be > output onto the rpi console as they are received. Set your station to a 5 > minute archive interval (300 seconds) using wee_device and set the archive > interval in weewx.conf to also be 300 seconds. You should then get > approximately 5 LOOP records per REC archive record. You will need to make > sure that barometer and altimeter are specified as being 'software > generated' because the 1080 only outputs pressure. See the wiki for the > difference between the 3. > > This should help you to see what is going on. Sort out the inputs and the > database before going on to the outputs and webpages!! If you have not > changed the archive interval to 300 seconds the default on the 1080 is > usually set for 30 minutes - so nothing would happen for 30 minutes in > weewx. > > > > On Monday, 8 July 2019 10:41:27 UTC+3, Victor wrote: >> >> Hello everyone, i recently found out about this project and wanted to >> test it out to see how it would work for me, currently I'm running pywws >> <https://github.com/jim-easterbrook/pywws> running on a Tp-link router >> with OpenWrt. But to be honest I really wanted to update the way I get the >> data from the router, from printing out a .CSV file to a more readable/user >> friendly web page. >> The device I'm using to run weewx is a Raspberry Pi 3 B+ and the >> weather station is a Tycon TP1080WC, the problems that I'm having is >> reading out the stations values, using live output I can see the program >> can read out values properly. It can get the wind direction properly and >> the reading from the pressure sensor but it doesn't add their value either >> to the web page data , realtime.txt file or the CSV( comma separated value) >> file (for the pressure sensor it adds the maximum read out as the current >> value). Trying to debug the problem myself i went through and install weewx >> using both the debian install guide and the setup.py method bout to the >> same effect. Using the minimal knowledge I have in python I tried to edit >> both the crt, csv weewx extentions to try and print out the values the >> programs are reading to try and get a basic understanding of the problem >> i'm getting, but sadly to no success. I've attached all the files I think >> will be needed to get a basic understanding in the configuration and >> problem. >> >> P.S. Don't worry about the time and date not being the same on all of the >> readouts , that my fault not the programs. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5822edb1-a5f3-4fdb-b706-181928225b78%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
