It appears that there is nothing in your logger. Did you try reseating it? If that does not help, then you will need to call or write Davis.
-tk On Wed, Jul 17, 2019 at 11:56 AM Ruben Navarro Huedo <[email protected]> wrote: > This is my summary.txt: > > > Davis Vantage EEPROM settings: > > CONSOLE TYPE: Vantage Vue > > CONSOLE FIRMWARE: > Date: Feb 3 2015 > Version: 4.18 > > CONSOLE SETTINGS: > Archive interval: 60 (seconds) > Altitude: 120 (meter) > Wind cup type: large > Rain bucket type: 0.2 mm > Rain year start: 1 > Onboard time: 2019-07-17 20:52:16 > > CONSOLE DISPLAY UNITS: > Barometer: hPa > Temperature: degree_C > Rain: mm > Wind: km_per_hour > > CONSOLE STATION INFO: > Latitude (onboard): +38.1° > Longitude (onboard): -0.3° > Use manual or auto DST? AUTO > DST setting: N/A > Use GMT offset or zone code? GMT_OFFSET > Time zone code: N/A > GMT offset: -2.0 hours > Temperature logging: LAST > Retransmit channel: ON (2) > > TRANSMITTERS: > Channel Receive Repeater Type > 1 active none iss > 2 inactive none (N/A) > 3 inactive none (N/A) > 4 inactive none (N/A) > 5 inactive none (N/A) > 6 inactive none (N/A) > 7 inactive none (N/A) > 8 inactive none (N/A) > > RECEPTION STATS: > Total packets received: 4180 > Total packets missed: 81 > Number of resynchronizations: 0 > Longest good stretch: 326 > Number of CRC errors: 2 > > BAROMETER CALIBRATION DATA: > Current barometer reading: 29.877 inHg > Altitude: 394 feet > Dew point: 71 F > Virtual temperature: 78 F > Humidity correction factor: 4.7 > Correction ratio: 1.014 > Correction constant: +0.000 inHg > Gain: 0.000 > Offset: -5.000 > > OFFSETS: > Wind direction: +0 deg > Inside Temperature: -2.0 F > Inside Humidity: +0 % > Outside Temperature: +0.0 F > Outside Humidity: +0 % > > 0 0 0 [*** Unused index ***] > 1 0 1 [*** Unused index ***] > 2 0 2 [*** Unused index ***] > 3 0 3 [*** Unused index ***] > 4 0 4 [*** Unused index ***] > 5 1 0 [*** Unused index ***] > 6 1 1 [*** Unused index ***] > 7 1 2 [*** Unused index ***] > 8 1 3 [*** Unused index ***] > 9 1 4 [*** Unused index ***] > 10 2 0 [*** Unused index ***] > 11 2 1 [*** Unused index ***] > 12 2 2 [*** Unused index ***] > 13 2 3 [*** Unused index ***] > 14 2 4 [*** Unused index ***] > 15 3 0 [*** Unused index ***] > 16 3 1 [*** Unused index ***] > 17 3 2 [*** Unused index ***] > 18 3 3 [*** Unused index ***] > 19 3 4 [*** Unused index ***] > 20 4 0 [*** Unused index ***] > 21 4 1 [*** Unused index ***] > 22 4 2 [*** Unused index ***] > 23 4 3 [*** Unused index ***] > 24 4 4 [*** Unused index ***] > 25 5 0 [*** Unused index ***] > 26 5 1 [*** Unused index ***] > 27 5 2 [*** Unused index ***] > 28 5 3 [*** Unused index ***] > 29 5 4 [*** Unused index ***] > 30 6 0 [*** Unused index ***] > 31 6 1 [*** Unused index ***] > 32 6 2 [*** Unused index ***] > 33 6 3 [*** Unused index ***] > 34 6 4 [*** Unused index ***] > 35 7 0 [*** Unused index ***] > 36 7 1 [*** Unused index ***] > 37 7 2 [*** Unused index ***] > 38 7 3 [*** Unused index ***] > 39 7 4 [*** Unused index ***] > 40 8 0 [*** Unused index ***] > 41 8 1 [*** Unused index ***] > 42 8 2 [*** Unused index ***] > 43 8 3 [*** Unused index ***] > 44 8 4 [*** Unused index ***] > 45 9 0 [*** Unused index ***] > 46 9 1 [*** Unused index ***] > 47 9 2 [*** Unused index ***] > 48 9 3 [*** Unused index ***] > 49 9 4 [*** Unused index ***] > 50 10 0 [*** Unused index ***] > 51 10 1 [*** Unused index ***] > 52 10 2 [*** Unused index ***] > 53 10 3 [*** Unused index ***] > 54 10 4 [*** Unused index ***] > 55 11 0 [*** Unused index ***] > 56 11 1 [*** Unused index ***] > 57 11 2 [*** Unused index ***] > 58 11 3 [*** Unused index ***] > 59 11 4 [*** Unused index ***] > 60 12 0 [*** Unused index ***] > > And the same until... > > 863 172 3 [*** Unused index ***] > 864 172 4 [*** Unused index ***] > > > El miércoles, 17 de julio de 2019, 19:43:46 (UTC+2), Thomas Keffer > escribió: >> >> For some reason, your logger is not saving archive record. >> >> If you are sure you reset the logger (check the system log!), then there >> are only two possibilities: >> >> Your logger is not seated properly (try reseating it). >> Your logger failed (it happens). >> >> You can check to see if there is anything in the logger with the command >> >> wee_device --logger-summary=/var/tmp/summary.txt >> >> Then post the file /var/tmp/summary.txt >> >> -tk >> >> >> > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/370fd4fe-8267-43c5-ac92-2cd6c74e33a0%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/370fd4fe-8267-43c5-ac92-2cd6c74e33a0%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEAC1zseYHnTyeZG8VQ6_EpKxM-szN%3DueD8w7rqiZrDnnA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
