The following is a note response by Matthew in GitHub blog regarding
Acurite Access:
*weewx does work with the access, but the access must send data in wu
format. configure the access to send wu data. ideally you would configure
it to send to the computer running weewx (use dns hijacking for this). then
configure interceptor to listen (not sniff), and it will simply receive the
wu data.*
*if you prefer to send to wu, then you must configure the interceptor to
sniff the traffic (not listen).*
*please post on the weewx user group for further help on this.*
*i am sorry there is not yet a guide specifically for intercepter and
access*
*1) WU DNS forwarding by DD-WRT router*
Setup>Forced DNS Redirection [On]
Services>ServicesTab>DNSmasq>Additional DNSmasq Options
address=/wunderground.com/Y.Y.Y.Y (where Y.Y.Y.Y is RaspberryPi IP)
*2) Directly test Interceptor* (should receive packages)
# PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py
--device=wu-client --mode=listen --port=80
*3) WeeWX Config*
[Interceptor]
# This section is for the network traffic interceptor driver.
driver = user.interceptor
device_type = wu-client
mode = listen
port = 80
If all works, html file generated at /var/www/html/weewx/index.html
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/ea50cd2c-4a94-41ac-a1bd-bb6a59e46851%40googlegroups.com.
