Apologies, was out. Good that you have it sorted Miguel. Just to go back to your previous post, there is only one HTML_ROOT but it can be set in many places, the location of the setting in the config hierarchy determines where that particular value is applied. You might like to read the section on ‘Option hierarchy’ in the User’s Guide (weewx.com/docs/usersguide.htm#Option_hierarchy). It is important to grasp the option hierarchy used by WeeWX if you intend tinkering as otherwise it is all too easy find your self fighting for control of options (and usually losing).
HTML_ROOT is usually used when dealing with WeeWX generated output (mainly reports) so you will typically find it used throughout the [StdReport] stanza in weewx.conf and throughput skin.conf. If you have been trying a lot of different combinations and have a fairly ‘well used’ weewx.conf or skin.conf it can be worthwhile tidying it up a bit to remove the possibility of confusion later. Just make sure you take a copy of your working config before digging in lest you break something during your clean up. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/170eb7df-83e1-4754-916d-39e63aa4f0e7%40googlegroups.com.
