Correct. One for the big "icks" for Acurite is the try their darnest to hide all of the data. All you can get is basic data going to WU. Next month I am going to dig into SDR and try to decode the Atlas station and see if I can get better data into WeeWx.
On Thursday, August 8, 2019 at 11:16:23 AM UTC-5, Xant wrote: > > > WeeWX Group > > Acurite Atlas under Hijack DNS using Interceptor driver reports the > following (same info, regardless of device="wu-client", or > device="acurite-bridge"): > > PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py > --device=*wu-client* --mode=listen --port=80 --debug > > identifiers: {} > raw data: > ID=KNYCLIFT14&PASSWORD=xxxxxx&softwaretype=myAcuRite&dateutc=now&action=updateraw&realtime=1&rtfreq=35&baromin=29.75&UV=1&humidity=71&tempf=78.7&windspeedmph=0&winddir=347&windgustmph=2&windgustdir=118&dewptf=68.5&dailyrainin=0.04&rainin=0.00 > raw packet: {'wind_speed': 0.0, 'barometer': 29.75, 'wind_gust': 2.0, > 'dewpoint': 68.5, 'humidity_out': 71.0, 'uv': 1.0, 'rain': None, > 'dateTime': 1565280428, 'temperature_out': 78.7, 'wind_dir': 347.0, > 'rain_total': 0.04, 'wind_gust_dir': 118.0, 'usUnits': 1} > mapped packet: {'barometer': 29.75, 'dewpoint': 68.5, 'outHumidity': 71.0, > 'UV': 1.0, 'rain': None, 'dateTime': 1565280428, 'windDir': 347.0, > 'outTemp': 78.7, 'windSpeed': 0.0, 'windGust': 2.0, 'usUnits': 1, > 'windGustDir': 118.0} > > PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py > --device=*acurite-bridge* --mode=listen --port=80 --debug > PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/interceptor.py > --device=wu-client --mode=listen --port=80 --debug > > identifiers: {} > raw data: > ID=KNYCLIFT14&PASSWORD=7ea672ca&softwaretype=myAcuRite&dateutc=now&action=updateraw&realtime=1&rtfreq=35&baromin=29.74&UV=1&humidity=72&tempf=78.6&windspeedmph=0&winddir=29&windgustmph=1&windgustdir=356&dewptf=68.8&dailyrainin=0.04&rainin=0.00 > raw packet: {'wind_speed': 0.0, 'barometer': 29.74, 'wind_gust': 1.0, > 'dewpoint': 68.8, 'humidity_out': 72.0, 'uv': 1.0, 'rain': 0.0, 'dateTime': > 1565280600, 'temperature_out': 78.6, 'wind_dir': 29.0, 'rain_total': 0.04, > 'wind_gust_dir': 356.0, 'usUnits': 1} > mapped packet: {'barometer': 29.74, 'dewpoint': 68.8, 'outHumidity': 72.0, > 'UV': 1.0, 'rain': 0.0, 'dateTime': 1565280600, 'windDir': 29.0, 'outTemp': > 78.6, 'windSpeed': 0.0, 'windGust': 1.0, 'usUnits': 1, 'windGustDir': 356.0} > > > Recently installed the Lighting sensor (06045M) into Atlas, but no > difference regarding variable/extension than previous... ie, no lightning > data. > > At first, would assume that Lighting info not been updated to WU, and > that's possibly why no further info. But Lighting data indeed been update > to MyAcurite website, but seems that Interceptor not able to acquire. > > Suggestions? > > Thanks, > Xant > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/70d255b4-bf16-4269-b951-c2c7a7a9fd9b%40googlegroups.com.