Again, set debug=1, restart weewx, then send the log through the first archive record generation.
On Mon, Aug 26, 2019 at 5:39 AM Roy Lamberton <[email protected]> wrote: > Here's the status of the WeeWx experiment with DW8780.... > > 1. I had to switch back to the Win10-Cumulus setup because of the > reporting interval issue. I need to spend a little more time reading the > documentation to see if I can figure it out. Right now the weewx.conf file > for CWOP is set to pull data every 5 minutes (300 seconds). But, the > Program uploads data to CWOP, PWS, and Wunderground every 30 minutes, and > there is no clear description in the doc about what to change to make it > happen on a different schedule. > > 2. My Linux computer, the host for WeeWx, still has some issues when it > boots up. These issues have to do with the unit updating, and its insane > desire to get every password known to man to operate cleanly Needless to > say, it is not presently a walk away system like my Win 10 PC. > > It might help if I was more experienced with Python - any positive > comments would be appreciated. Thank you > rsl > > . > > On Sun, Aug 25, 2019 at 11:42 PM rstetson1 <[email protected]> wrote: > >> Ok, I have CWOP interval set to 300 or everj 5 minutes, but it actually >> only updates CEOP every 30 minutes. >> >> Where and how do you change that interval? >> >> rsl >> >> >> >> On the Road... maybe. Sent from my T-Mobile 4G LTE Device >> >> -------- Original message -------- >> From: Thomas Keffer <[email protected]> >> Date: 8/25/19 7:41 PM (GMT-05:00) >> To: weewx-user <[email protected]> >> Subject: Re: [weewx-user] Re: No Updates on new system >> >> I'm not sure what you're referring to. If you mean "debug", it's at the >> top of your weewx.conf file. >> >> -tk >> >> On Sun, Aug 25, 2019 at 4:36 PM rstetson1 <[email protected]> wrote: >> >>> Will look for that variable. It's not in the doc that I have. >>> >>> thanks >>> >>> rsl >>> >>> >>> >>> On the Road... maybe. Sent from my T-Mobile 4G LTE Device >>> >>> -------- Original message -------- >>> From: Andrew Milner <[email protected]> >>> Date: 8/25/19 1:35 PM (GMT-05:00) >>> To: weewx-user <[email protected]> >>> Subject: [weewx-user] Re: No Updates on new system >>> >>> Well you did not actually post for two archive intervals. Weewx usually >>> reads vantage loop data every few seconds and rec data according to the >>> archive interval specified in the console. this can be adjusted using >>> wee_device. the start up sequence usually gives the archive interval which >>> weewx will use (ie the console or as specified in weewx.conf) - but your >>> log file does not start from the beginning of the start up sequence. Data >>> is usually output once every archive interval to reports and/or WU, CWOP >>> etc. The fact that your CWOP is at 30 minute intervals makes me think that >>> the console is probably set taking records at 30 minute intervals. If you >>> want 5 minute intervals then you will need to idealy set console = >>> weewx.conf = 5 minute (300 seconds) interval. >>> >>> >>> >>> >>> On Sunday, 25 August 2019 20:22:21 UTC+3, Roy Lamberton wrote: >>>> >>>> The CWOP and PWS updated at 1200, 1230, & 1300, regardless of the time >>>> of the setting under CWOP in the .conf file. >>>> >>>> I'm not sure where you tell the system to generate the transmissions, >>>> but that is happening every 30 minutes at the top and bottom of the hour. >>>> >>>> Here is the log: >>>> roy@roy-STCK1A8LFC:/etc/weewx$ tail -f /var/log/syslog >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: manager: Daily summary >>>> version is 2.0 >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: message repeated 2 times: [ >>>> manager: Daily summary version is 2.0] >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: engine: Clock error is >>>> -1.20 seconds (positive is fast) >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Getting archive >>>> packets since 2019-08-25 13:00:00 EDT (1566752400) >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Gentle wake up of >>>> console successful >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Retrieving 0 >>>> page(s); starting index= 0 >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: engine: Starting main >>>> packet loop. >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Gentle wake up of >>>> console successful >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Requesting 200 >>>> LOOP packets. >>>> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Gentle wake up of >>>> console successful >>>> Aug 25 13:07:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >>>> CTRL-EVENT-SCAN-STARTED >>>> Aug 25 13:11:30 roy-STCK1A8LFC wpa_supplicant[1179]: message repeated 2 >>>> times: [ wlan1: CTRL-EVENT-SCAN-STARTED ] >>>> Aug 25 13:12:57 roy-STCK1A8LFC weewx[8075]: vantage: Requesting 200 >>>> LOOP packets. >>>> Aug 25 13:12:57 roy-STCK1A8LFC weewx[8075]: vantage: Gentle wake up of >>>> console successful >>>> Aug 25 13:13:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >>>> CTRL-EVENT-SCAN-STARTED >>>> Aug 25 13:15:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >>>> CTRL-EVENT-SCAN-STARTED >>>> Aug 25 13:17:01 roy-STCK1A8LFC CRON[8141]: (root) CMD ( cd / && >>>> run-parts --report /etc/cron.hourly) >>>> Aug 25 13:17:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >>>> CTRL-EVENT-SCAN-STARTED >>>> >>>> It appears that WeeWx is asking the console for an update every 5 >>>> minutes, but then sits on the data until the top and bottom of the hour. >>>> Because of my location, CWOP always wanted a 5 minute reporting interval. >>>> So did Wunderground. >>>> >>>> I can't find anything that changes the time between reports that I >>>> haven't changed. >>>> >>>> >>>> On Sunday, August 25, 2019 at 1:05:35 PM UTC-4, Andrew Milner wrote: >>>>> >>>>> Posting the log from startup until two archive intervals have passed >>>>> would help analysing your problem. >>>>> >>>>> >>>>> >>>>> On Sunday, 25 August 2019 19:49:48 UTC+3, Roy Lamberton wrote: >>>>>> >>>>>> Update - it is posting the latest information every time I restart >>>>>> WeeWx, but then it asks for the LOOP Packets every 5 minutes, but doesn't >>>>>> process them. >>>>>> >>>>>> It almost seems like the software is getting the data but doesn't >>>>>> know what to do with it. >>>>>> >>>>>> I can't find anything in the Doc about the conf file that talks about >>>>>> timing of upload, except the Wunderground flash, which I turned off >>>>>> temporarily. >>>>>> >>>>>> But I need to talk with someone fast, or I'm going badcfk to my old >>>>>> Cumulus setup and putting WeeWx on hold. >>>>>> >>>>>> >>>>>> rsl >>>>>> On Sunday, August 25, 2019 at 12:19:43 PM UTC-4, Roy Lamberton wrote: >>>>>>> >>>>>>> OK, I have WeeWx running on an Ubuntu desktop PC and its connected >>>>>>> and appears to be working, but it isn't updating CWOP or any of the >>>>>>> other >>>>>>> weather systems: >>>>>>> >>>>>>> Here's the syslog" >>>>>>> roy@roy-STCK1A8LFC:/etc/weewx$ tail -f /var/log/syslog >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: manager: Daily summary >>>>>>> version is 2.0 >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: message repeated 2 >>>>>>> times: [ manager: Daily summary version is 2.0] >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: engine: Clock error is >>>>>>> -0.45 seconds (positive is fast) >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Getting archive >>>>>>> packets since 2019-08-25 12:00:00 EDT (1566748800) >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Gentle wake up >>>>>>> of console successful >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Retrieving 0 >>>>>>> page(s); starting index= 0 >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: engine: Starting main >>>>>>> packet loop. >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Gentle wake up >>>>>>> of console successful >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Requesting 200 >>>>>>> LOOP packets. >>>>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Gentle wake up >>>>>>> of console successful >>>>>>> Aug 25 12:05:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >>>>>>> CTRL-EVENT-SCAN-STARTED >>>>>>> >>>>>>> When I first ran it, the woftware download 2 months of data from the >>>>>>> console, and it did update one time when I restarted the software, but >>>>>>> now >>>>>>> it doesn't seem to be updating CWOP or the web page on the PC. >>>>>>> >>>>>>> ??? >>>>>>> >>>>>>> rsl >>>>>>> >>>>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/eafc3a4d-8125-4af4-9256-3f21ac2ce293%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/eafc3a4d-8125-4af4-9256-3f21ac2ce293%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/5d62cf5d.1c69fb81.79422.2831%40mx.google.com >>> <https://groups.google.com/d/msgid/weewx-user/5d62cf5d.1c69fb81.79422.2831%40mx.google.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/CAPq0zEC%2BLGjjLsB5BHyN3%2Bs0hiRBpW-Cgb%3DJdTEA34N4owsYxg%40mail.gmail.com >> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEC%2BLGjjLsB5BHyN3%2Bs0hiRBpW-Cgb%3DJdTEA34N4owsYxg%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAKCBP39H5nxnWTJtpunmSis1x_M%3DOCD5%2BBBbPtJuvNmKiw2XQQ%40mail.gmail.com > <https://groups.google.com/d/msgid/weewx-user/CAKCBP39H5nxnWTJtpunmSis1x_M%3DOCD5%2BBBbPtJuvNmKiw2XQQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEB8pqFicM1XMXqVEJ8JwPVKuQ3T2KT1BkDzbvCZs904YQ%40mail.gmail.com.
