Hi,

The fields you are seeing are those that your driver emits, so apart from 
the obvious (eg outTemp etc) you need to look to your driver. For the 
Aercus 3083 I expect your are using the fousb driver. Have a look through 
the fousb driver file, it should be in 
/home/weewx/bin/weewx/drivers/fousb.py or 
/usr/share/weewx/weewx/drivers/fousb.py depending on your install. You may 
find some info in the comments up front of the driver file else you will 
need to trawl through the code. You may also find some info in the Hardware 
Guide for your station/driver 
<http://weewx.com/docs/hardware.htm#fousb_data28>.

Gary

On Saturday, 21 September 2019 02:41:00 UTC+10, Mike Mike wrote:
>
> Hello,
>
> Can anyone identify the meaning of the fields highlighted below in *red 
> *(delay, 
> ptr, rxCheckPercent and status)
>
> Output is JSON, parsed from output of *wee_device --current* 
>
>
> {
> "id": "1373",
> "apiUser": "apiTester",
> "ts": "1568996322",
> *"delay": "26",*
> "inHumidity": "43",
> "inTemp": "25.3",
> "outHumidity": "58",
> "outTemp": "17.8",
> "pressure": "1005.1",
> *"ptr": "15416",*
> "radiation": "200.232",
> "rain": "0.00",
> "rainTotal": "4.350",
> *"rxCheckPercent": "100",*
> *"status": "0",  *
> "usUnits": "16",
> "windDir": "157.5",
> "windGust": "20.88",
> "windSpeed": "17.28",
> "UV": "1"
> }
>
> I think... 
> *rxCheckPercentage* is signal integrity from sensors to console.
> *delay* never above 26 or so, really not sure what it is.
> *ptr* is todo with console memory.
> *status* 0 (zero) means successful read of console, I have never seen any 
> other code.
>
> The station is an Aercus WS3083.  I'm using a raspPi on a cron job to run 
> "wee_device --current" every minute and parsing in Python for onward use.  
> I am not using weewxd.
>
> Any help appreciated and thanks in advance,
> Mike
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fb019d8a-4f57-44d2-8252-b11bf2b3a7a5%40googlegroups.com.

Reply via email to