windchill and heatindex are only available in the LOOP2 loop packets and LOOP2 support will not be available until v4.0. Under 4.0 if you set WeeWX to use LOOP2 packets and set record_generation = software under [StdArchive] in weewx.conf you should be able to get heatindex and windchill from the station. But I would argue whether you are any better off, the station derives windchill and heatindex (just as WeeWX does) and if you look at Davis Application Note 28 <https://www.davisinstruments.com/product_documents/weather/app_notes/AN_28-derived-weather-variables.pdf> you see the station exhibits similar behaviour as WeeWX for conditions outside certain limits (albeit different to NOAA).
Gary On Monday, 14 October 2019 09:14:56 UTC+10, Hyrules Hyrules wrote: > > Or simpler is there a way for weewx to just take the value from the > weather station as it is in the loop data ? > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e04b3a58-a475-411e-bd09-2191faf15cb3%40googlegroups.com.
