The data is different, but the wind graphs best showed examples of what I was talking about. I think you nailed it, the archive interval on my VP2 was set for 1 minute. I just bumped it up to 5 and from what I see so far I think it fixed it.
On Thursday, October 17, 2019 at 7:52:35 AM UTC-4, Andrew Milner wrote: > > a stupid question - but are they plotting the same data?? The scales on > the graphs are different I see. Is one plotting max and one plotting > average? Check the skins to find any differences in the plotting - the > station is not likely to be causing the difference unless the stations have > different intervals specified. Have you verified that both stations a) > have the same interval in weewx.conf b)are both using either hardware or > software record generation and c) the stations themselves have the same > archive interval specified as is specified in weewx.conf (change with > wee_device if needed) > > > > On Thursday, 17 October 2019 14:23:55 UTC+3, John Burricelli wrote: >> >> I have 2 setups, 1 is a VP2 with an Envoy hooked up to a Pi. 2nd is a >> Vantage Vue with the console hooked up to a Pi. They are both setup pretty >> much the same way. >> >> Using the wind graphs as an example. The graphs look fine on the Vue, >> however the line graphs on the VP2 seem to merge into each other. I have >> the archive interval set for both at 300. >> >> Is there some sort of setting I have overlooked somewhere? >> >> >> [image: VP2.png] >> >> [image: VantageVue.png] >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/db9f3dea-5aa2-45b5-96cf-495189783c7e%40googlegroups.com.
