Yes, I realise that, but my weewx.conf is the same as the section you
highlight but I'm still not seeing celcius and mph...
This is my current weewx.conf
[[Defaults]]
[[[Units]]]
# The following section sets what unit to use for each unit
group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = foot # Options are 'foot' or 'meter'
group_degree_day = degree_C_day # Options are
'degree_F_day' or 'degree_C_day'
group_pressure = mbar # Options are 'inHg', 'mmHg',
'mbar', or 'hPa'
group_rain = mm # Options are 'inch', 'cm', or 'mm'
group_rainrate = mm_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = mile_per_hour # Options are
'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = mile_per_hour2 # Options are
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_C # Options are 'degree_F' or
'degree_C'
On Saturday, 26 October 2019 13:38:22 UTC+1, Pat wrote:
>
> A lot of these items are covered in the documentation
> <https://github.com/poblabs/weewx-belchertown#table-of-contents>. Check
> out this section
> <https://github.com/poblabs/weewx-belchertown#using-metric>.
>
>
> On Saturday, October 26, 2019 at 8:36:24 AM UTC-4, Matt wrote:
>>
>> Superb! That worked. Thank you very much. I am in the UK and use degrees
>> Celcius and Miles per hour. What should I set unit_system to (METRIC gives
>> me celcius but kmh, US gives me fahrenheit and miles per hour)?
>>
>> On Saturday, 26 October 2019 12:22:41 UTC+1, Pat wrote:
>>>
>>> Try changing mqtt_websockets_topic to weather/loop
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/632fdd34-1224-4ad9-a30a-028f27a31d84%40googlegroups.com.
