Seems this is an issue for the weewx-sdr driver, not WeeWx. I'll post the question on the weewx-sdr github.
On Tuesday, November 5, 2019 at 12:49:39 PM UTC-8, Rogene T. wrote: > > Hi everyone, > > I recently got WeeWx running with SDR, using the 'recipe' located here: > https://github.com/weewx/weewx/wiki/sdr-rpi-recipe > I'm successfully capturing and publishing data from 3 different sensors. > > Recently, I added an Oregon Scientific UVR128 sensor. RTL_433 added > support in 2018. It appears correctly when looking at output from RTL_433. > > I ran this command to obtain the sensor name for mapping: > > sudo PYTHONPATH=/usr/share/weewx python /usr/share/weewx/user/sdr.py > --cmd="rtl_433 -M utc -F json -G" > > > It gives me an output line: > > out: ['{"time" : "2019-11-05 07:07:07", "model" : "Oregon Scientific > UVR128", "id" : 116, "uv" : 0, "battery" : "OK"}\n'] > > > But it is not followed by a "parsed:" line. > > Any help would be appreciated! > > -R > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/08488824-0b00-4830-a601-f2b7e6c4879b%40googlegroups.com.
