Il giorno sabato 7 dicembre 2019 13:42:52 UTC+1, mwall ha scritto: > On Saturday, December 7, 2019 at 3:57:00 AM UTC-5, S1m0n3 wrote: > After an year I've tried again to work with Weewx but I've same problem with > rain 😢 can I do some things?! Thanks!!! > > > sorry this is taking so long to resolve. > > > as gary pointed out, it looks like a units conversion issue. > > > fwiw, rtl_433 has at least three different decoding implementations for the > fine offset x080 stations, and there have been variations in the units in > those over the years. that is why weewx-sdr works fine for one person but > not for another - they are using different versions of rtl_433, and different > fine offset packet decodings. > > > > so what can you do? > > first of all, before you try to make any sense of the rain rate, first be > sure that the rain count is working properly. rain rate is a derived > quantity, so if your rain count is incorrect, the rain rate will never be > correct. > > > secondly, update to the latest rtl_433 and the latest weewx-sdr. there are > just too many variations of rtl_433 out there for me to make weewx-sdr work > with every one. > > > then do some tests. run weewx directly so that you can see each loop and > archive packet as it happens. capture them to file. pour water into the > rain bucket and see what happens. > > > sudo weewxd weewx.conf | tee /var/tmp/rain-test-packets.log > > > at that point it should be obvious where the problem is. > > > m
Found the problem, loop and rec has right value but when achieved it's multiplicate for 10 so in one hour i have 1,2mm of rain from 2,7 total rain to 3,9 and in archive I've 12mm 😳 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1058b211-0f2b-40c0-94ae-7785c6fd5b32%40googlegroups.com.
