As Matthew intimated it is likely the sdr driver needs some changes. I suggest you proceed as per Matthew's last post:
1. update to both the latest rtl_433 and sdr driver (you have not indicated if you have done this or not) 2. run some tests as outlined by Matthew, this may be best achieved by manually pouring water into your rain gauge whilst recording the results. 3. post the results (in the case above the file /var/tmp/rain-test-packets.log) 4. post a copy of the [StdConvert] stanza from your weewx.conf, this way we know what unit system your archive is using) Once we have that info it should be clear where the cause lies and if necessary Matthew can fix the sdr driver. Descriptive/piecemeal info can be helpful but in this case we need to see complete records/file extracts. Gary On Tuesday, 10 December 2019 07:20:07 UTC+10, S1m0n3 wrote: > > Yes, correct the usUnit in loop is 16 Metric (cm) and not 17 (mm) so this > clarify the rain_total * 10. But how I can change it? 🤔 > > Thanks! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ff9ce130-c736-4be1-af76-36da7e1b55a5%40googlegroups.com.
